A bad UDP packet on a flaky link could permanently wedge the voice path,
unrecoverable even across app restarts. Three defects:
1. Anti-replay window was advanced from the UNAUTHENTICATED header seq
before the AEAD tag was checked, and not rolled back on failure. One
corrupted/forged frame shoved recv_highest_ far ahead, after which every
legitimate frame was rejected as "too old" forever. Reorder to
replay-check -> authenticate -> update (RFC 3711 3.3); the window now
moves only after a successful tag check.
2. The wire seq was only the low 16 bits of the nonce counter (zero-extended
on receive). After 65,536 frames the nonce desynced and all frames failed
auth. Widen the voice frame seq u16 -> u64 (header 14 -> 20 bytes). The
core owns all UDP framing, so Swift/C# clients need only a rebuild. This
is a versioned wire change: VOICECAT_PROTOCOL_VERSION 1 -> 2, handshake
rejects on mismatch.
3. Server leaked per-session UDP state on disconnect; unregister_session now
frees udp_endpoints_/udp_tokens_/ssrc_to_session_.
Also add rate-limited dropped-frame logging to MediaRelay so a wedged media
path is observable. New regression tests in test_media_aead.cpp cover the
poison (fails on old code) and the 16-bit wrap. ctest --preset dev
-E external_pcm: 22/22 pass (external_pcm aborts on a pre-existing CoreAudio
shutdown race, unrelated).
Adds Opus 1.6 DRED support end-to-end: encoder embeds 20 ms of ML
redundancy in every packet when enabled; decoder recovers lost frames
from the next buffered packet's DRED extension rather than falling back
to PLC comfort noise.
Protocol: bool dred = 11 added to AudioConfig (backward-compatible,
defaults false). C ABI: int dred added to vc_audio_config. Encoder:
OPUS_SET_DRED_DURATION(2) when dred=true. Decoder: OpusDREDDecoder +
per-stream OpusDRED scratch pre-allocated off the RT thread;
JitterBuffer::try_copy_front_payload peeks at the next packet without
popping on every PLC step; opus_decoder_dred_decode reconstructs the
lost frame if DRED data is present, otherwise falls back to PLC.
New test: test_dred_toggle (22/22 ctest green).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Three iOS client problems fixed plus a new core stereo-mic capture ABI:
1. Channel-id sync bug (mic button permanently dimmed): SessionState never
synced currentChannelId from the self user's channelId on connect, so the
mic button (gated on currentChannelId == 0) stayed dimmed. Added
syncSelfChannel() (mirrors macOS MainWindowController.swift:461,491,522);
called from init/.channelList/.userJoined/.userLeft/.userUpdated/.joinResult.
Added applyServerMuteState() + serverMuted/serverDeafened to VoiceState.
2. Join/Leave Voice button: replaced icon-only mic toggle with explicit
text button (parity with macOS). Mute/deafen disable when not in voice.
3. IOSAudioRouter.swift (new): full AVAudioSession routing layer — input
port selection, built-in mic orientation/polar patterns, Bluetooth
HFP/A2DP/Off modes, Standard/Raw mic processing, stereo capture, AirPlay,
UserDefaults persistence. AudioSessionManager delegates to it.
4. Core stereo-mic capture (append-only ABI): vc_set_capture_channels()
lets the core open the mic device in stereo (2-ch interleaved). LocalStream
gains capture_channels; ensure_audio_running reads it; audio_engine.cpp
capture_accum_ + on_capture updated to channel-aware accumulation. Test
test_stereo_mic_capture (headless, L!=R stereo round-trip). Swift wrapper
VoiceCatClient.setCaptureChannels.
5. Settings UI rework: AVAudioSession-derived input/output tree replaces
miniaudio device picker.
6. iOS deployment target raised to 18.0 (Package.swift + project.pbxproj).
swift-tools-version 6.0 with swiftLanguageModes .v5.
Docs: tech-stack.md, architecture.md, voice.md, roadmap.md, building.md
updated; stale 'vc_audio_suspend/resume deferred' claims corrected.
Verified: ctest --preset dev 21/21 green; swift test 6/6 green;
xcodebuild -target VoiceCatiOS -sdk iphonesimulator BUILD SUCCEEDED.
macOS port groundwork — core, server, tools, and tests now build and run on
macOS 26.5 / Apple Silicon. ctest --preset dev green 21/21 (2 consecutive runs).
apple-dev produces valid arm64 libvoicecat.a + XCFramework for the Swift Package.
Three real cross-platform bugs found and fixed (all latent on Windows/Linux):
1. test_m2_voice.cpp POSIX branch missing <netdb.h> — Linux glibc transitively
includes it, macOS doesn't. Would fail on any strict POSIX system.
2. SIGPIPE killing processes on macOS — writing to a closed TCP socket raises
SIGPIPE by default (doesn't exist on Windows, benign on Linux). Fixed by
ignoring SIGPIPE in both core client init and server startup (POSIX-only,
#ifndef _WIN32). Production fix, not just tests.
3. Use-after-free of Asio's kqueue reactor on server shutdown — the
deterministic test_tofu_flow segfault. TcpServerConn's tls_read_loop runs on
a blocking-I/O thread; when Server::run() returned, io_context was destroyed
while those threads were still running. On macOS kqueue the reactor pointer
is null'd immediately -> segfault in socket.close(). Latent on Windows IOCP
and Linux epoll. Fix: TcpAcceptor now tracks connections; new shutdown()
closes all + joins threads before io is destroyed; Server::stop() now closes
acceptor + media_relay too (was just io.stop()).
Verified: dev + apple-dev presets build green, 21/21 tests pass, server starts
+ two vccli text chat over TLS (M1 on Mac), vccli --voice starts MIC stream via
CoreAudio (M2 protocol-level), vccli --list-devices enumerates CoreAudio
devices, xcodebuild -create-xcframework produces valid VoiceCatCore.xcframework.
No ABI or proto changes. Docs updated: building.md, clients/apple/README.md,
PROGRESS.md, CLAUDE.md status line.
Rationalize the preset set to match the project's actual state (past M5):
- Rename dev->skeleton (no-deps stub smoke), m1-dev->dev (default dev preset)
- Drop m2-dev (cache-identical to m1-dev)
- Add release preset (optimized + tests on, symbols kept)
- Strip server-release binaries (-s linker flag)
- Add apple-dev/apple-ios/apple-ios-sim scaffolding presets for XCFramework
Add cmake/voicecat-toolchain.cmake wrapper that auto-resolves the vcpkg
triplet from the host platform (x64-mingw-static/x64-linux/arm64-osx) so
the main presets work on Windows/Linux/macOS without per-OS variants.
Update all docs (building.md, CLAUDE.md, README.md, AGENTS.md, deployment.md,
tech-stack.md, client READMEs) and stale preset-name references in code
comments. No C++ behavior changes — the core was already portable.
PerUserTuningDialog previously broadcast one gain/mute/NR set to *all* of a
user's streams, even though the core mixer (AudioEngine::RemoteStream) and
the C ABI (vc_set_remote_stream) were already per-stream. The UI had no
per-mix controls anywhere.
Reworks the dialog to enumerate ListUserStreams on open and render one row
per stream (kind + label + Gain + Mute + NR), each wiring only to its own
stream_id. Adds a read-back ABI counterpart, vc_get_remote_stream, so the
dialog opens at the listener's actual current per-stream settings (defaults
1.0/unmuted/NR-off) rather than always 100%. Additive ABI change only; no
existing symbols touched.
Tests: test_m3_multistream extended with getter round-trip assertions; new
C# smoke test exercises the full P/Invoke marshaling path with two clients.
Docs: voice.md §10 notes the getter. NR checkbox keeps its honest
'passthrough' label (NS DSP still unbuilt per §8).
Three reported bugs traced to one root cause plus two missing designed features:
1. Stale users + eternal PLC hiss (root cause): ConnSession::close() silently
erased dropped users without broadcasting UserEvent::LEFT, so peers never
learned the user left and their audio engines never called remove_stream —
Opus PLC synthesized comfort noise forever. Fix: broadcast_left() helper
+ close() broadcasts LEFT before erasing.
2. PLC cap (defense-in-depth): on_playback now caps pure PLC at ~2s, then
emits digital silence so a stale stream can never hiss forever even if
remove_stream is skipped. Resets automatically on fresh packets.
3. No timeout / no ping: client never sent Ping, server had no last_seen /
reaper, so half-open connections (NAT timeout, wifi loss, sleep) left
ghost users forever. Fix: client Ping every 15s with RTT measurement,
ConnSession::last_seen bumped on every inbound TCP/UDP frame, steady_timer
reaper sweeps every 15s and drops sessions older than 45s (configurable
via server::Config).
4. UDP KEEPALIVE: client sends plaintext kFrameKeepalive every 5s; server
bumps last_seen + echoes back. Keeps NAT bindings alive and lets media
activity defer the reaper independently of TCP.
5. Graceful client disconnect: vc_disconnect() sends Disconnect{code=0} via
a flag-based io-thread exit (no double-close race); server handles
client-sent Disconnect with immediate close() + LEFT broadcast.
3 new tests: disconnect_left, plc_cap, reaper_timeout. 21/21 ctest green.
Docs: protocol.md §6/§7, voice.md §6, architecture.md §5, PROGRESS.md.
start_loopback_capture hardcoded channels=1, forcing miniaudio to downmix the system's stereo mix to mono before the encoder saw it -- on_capture_frame then upmixed L=R to produce fake stereo. Now the loopback device opens in the channel's mode (stereo when the channel is stereo), CaptureCallback carries an explicit channels param so the encoder gets real interleaved L/R, and a mono fallback covers unusual render endpoints. New test_loopback_stereo_capture asserts L!=R end-to-end; 18/18 ctest green.
The media AEAD nonce is an implicit per-direction monotonic counter;
open() reconstructs it from the 14-byte header seq field (the AAD), so
the contract is header.seq == the counter seal() used. The SFU relay
decrypted inbound frames with the sender key, re-sealed with the
recipient send_crypto (its own counter), but forwarded the sender
header verbatim -- so seq carried the wrong counter and the recipient
rebuilt the wrong nonce, silently dropping every relayed frame. It only
worked for a single first-ever sender into a fresh recipient, which is
why reverse/3rd-party audio failed.
Rewrite the outgoing header seq to the recipient peek_send_counter()
before re-sealing so each server->client direction is one contiguous
monotonic counter and the nonce always matches. Safe: the jitter buffer
orders by timestamp, not seq. No wire-format/proto/ABI change.
Adds test_relay_interleaved_reseal regression coverage.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
RemoteStream::playout_ts was seeded to 0 and only advanced inside the
decode loop (including on every PLC iteration), so it free-ran at ~1x
wall-clock regardless of whether the sender was transmitting. The
sender's frame timestamps only advance while it actually sends (the
VAD/PTT gate returns before ls.timestamp += samples). Across a late join
or any VAD/PTT silence gap the two clocks diverged without bound; once
past the jitter buffer's 500 ms late-drop window every real frame was
dropped-as-late (clock ahead) or never-due (clock behind) -> permanent
silence, while the talk indicator (driven by push_recv_frame, independent
of the jitter buffer) stayed lit.
Add JitterBuffer::peek_front_ts() (try-lock, RT-safe) and seed/re-sync
playout_ts to the earliest buffered frame on the first frame and whenever
it has drifted past +/-200/500 ms. This seeds startup and recovers after
every silence gap.
New regression test test_playout_resync free-runs the clock ~2 s past the
drop window, pushes a ts=0 frame, and asserts audible output: fails
(energy=0) without the fix, passes with it. ctest --preset m1-dev: 14/14.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
AudioEngine::on_capture() was passing miniaudio's hardware callback period
(commonly 480 samples / 10 ms on WASAPI shared mode) directly to opus_encode(),
which requires exactly frame_samples_ (960 for 20 ms @ 48 kHz). The mismatch
returned OPUS_BAD_ARG and silently dropped every real mic frame, while screen
share and injected test frames happened to be correctly sized and worked fine.
Fix: accumulate PCM in a pre-allocated CaptureAccum buffer (mirroring the
existing RemoteStream::ring fix on the playback side) and only call capture_cb_
when a full frame_samples_ chunk is ready. Same pattern applied to on_loopback().
Add test_capture_frame_accumulation() to verify the accumulator fires exactly the
right number of callbacks for misaligned chunk sizes (480, 240+720, 1920 samples).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Closes the three items PROGRESS.md's M3 section explicitly carried forward as
out of scope:
- Device enumeration (vc_list_devices) + input device selection
(vc_set_input_device), backed by AudioEngine::enumerate_devices() via
miniaudio's ma_context_get_devices. Device ids are opaque hex-encoded
ma_device_id strings.
- VAD/PTT send-side input gate (vc_set_input_mode, vc_set_push_to_talk).
webrtc-audio-processing (the originally-planned APM) has no working
Windows/MSVC build upstream (GCC-only Meson, unfinished MinGW support, hard
abseil-cpp dependency), so VAD is a new lightweight, dependency-free
energy/RMS processor (EnergyVadProcessor) behind the existing ApmProcessor
interface. Gating is MIC-only; SCREEN_AUDIO/AUX_DEVICE always bypass it.
- True stereo playback: AudioEngine's mixer and output device now carry
stereo end-to-end (mono streams upmix L=R) instead of downmixing decoded
stereo streams to mono before mixing.
- Real WASAPI loopback capture for SCREEN_AUDIO (Windows-only, via
miniaudio's loopback device type), replacing test-only injection as the
production capture path.
Also: vccli gains --list-devices, --input-device, --input-mode, and
--share-screen-audio flags, plus a stdin command loop (ptt on/off, mode
vad/ptt) for manual verification. New test_vad_ptt_devices.cpp covers all
four items (ABI-level + a white-box AudioEngine stereo-mix check).
Docs updated to match: voice.md, roadmap.md (decision-log entry superseding
the original webrtc-audio-processing choice), tech-stack.md, README.md,
architecture.md, CLAUDE.md, PROGRESS.md.
Still explicitly out of scope, documented not silently dropped: real
webrtc-audio-processing/AEC (no AEC/NS/AGC exists at all yet), macOS/iOS
SCREEN_AUDIO capture, process-specific loopback, and a pre-existing
RT-thread rule violation in the capture path that predates this work.
Verified: ctest 12/12 green across 3 consecutive full-suite runs (both dev
and m1-dev presets build clean); test_vad_ptt_devices passed 5 consecutive
standalone runs; manually verified live (vccli --list-devices against real
hardware, vccli --voice --input-mode vad streaming without incident).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Implements docs/roadmap.md M3: multiple concurrent streams per user (MIC +
SCREEN_AUDIO + AUX_DEVICE), independent per-stream receiver gain/mute/noise-
reduction, talk indicators, and enforced per-channel Opus configurability
(mono/stereo, bitrate, frame size, FEC/DTX, application).
Bugs fixed along the way (found while implementing, not pre-existing scope):
- Server hard-coded stream_id=1 for every announce, so a second stream from
the same user silently overwrote the first in SessionRegistry::set_user_stream.
Now a per-session counter (ConnSession::next_stream_id_); handle_stream_stop
validates against announced_stream_ids_ before clearing.
- Client dropped mode/dtx/complexity/application from effective_audio even for
the single M2 stream -- only sample_rate/bitrate_bps/frame_ms/fec were ever
applied to OpusParams. Fixed on both the send (handle_stream_announce_result)
and receive (sync_remote_streams) paths via a shared
opus_params_from_audio_config() helper.
- OpusEncoder always used OPUS_APPLICATION_VOIP; added OpusParams::application
and wired it through.
- on_playback's per-stream decode passed the wrong frame_size to opus_decode
(total samples instead of samples-per-channel), which would have overflowed
the decode buffer for any stereo stream.
- teardown_voice() raced when called concurrently from run_io()'s own cleanup
and from disconnect() on a different thread -- both could see
udp_thread_/talk_timer_thread_ as joinable() at once and race to join() the
same std::thread (intermittent std::system_error under ctest). Fixed with a
teardown_mu_ guard instead of carrying the flake forward.
New:
- Per-channel AudioConfig: SessionRegistry now seeds Lobby (mono/24kbps/VOIP/
FEC+DTX) and a new "Music Room" channel (stereo/128kbps/AUDIO/no DTX);
handle_stream_announce enforces the channel's config, clamping (not
overriding) bitrate_bps to its ceiling.
- core/src/core/client.h/.cpp: local-stream state is now a
std::unordered_map<int, LocalStream> keyed by vc_stream_kind, with
request_id-correlated announce/result handling (request_id already
round-tripped on the wire; just wasn't read before). on_capture_frame is
kind-aware and upmixes mono capture to stereo when a stream's config calls
for it. set_self_mute's mic_muted now only gates the MIC kind. NS is wired
through set_remote_stream. New run_talk_timer() thread emits
VC_EVENT_TALK_STATE from both remote and local edge detection.
- core/src/audio/audio_engine.h/.cpp: kind-keyed injection taps
(inject_capture), stereo-to-mono downmix at the decode/mix boundary,
RemoteStream gains recv_ns (lazy ApmProcessor) + noise_reduction_enabled
and last_voice_ms/talking; new set_stream_noise_reduction() and
poll_talk_transitions().
- core/src/session/session.h/.cpp: Stream now carries the full AudioConfig,
not just sample_rate/frame_ms.
- New additive C ABI (core/include/voicecat.h): vc_audio_config +
vc_get_stream_audio_config (effective Opus config for any stream you own or
a peer's); vc_test_inject_capture (test-only synthetic PCM injection,
clearly marked, mirrors AudioEngine::inject_capture).
- tests/test_m3_multistream.cpp: the M3 exit criterion through the real ABI
(mirrors test_voice_client_abi.cpp's approach, not raw sockets) -- two
concurrent local streams, independent gain/mute/NS control, per-channel
config divergence via vc_get_stream_audio_config, talk indicators.
Explicitly out of scope for this pass (tracked in PROGRESS.md, not silently
dropped): VAD/PTT input gate + device enumeration; real WASAPI loopback
capture for SCREEN_AUDIO (synthetic injection only); true stereo playback
output (AudioEngine's mixer/output device stays mono -- Opus itself is fully
stereo-correct on the wire).
ctest --test-dir build/m1-dev: 11/11 green, verified across 3 consecutive
full-suite runs plus 8 standalone runs of the new test.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
test_m2_voice passed against raw BSD sockets, but vc_client::stream_start/stop,
UDP binding, and capture/recv were still VC_ERR_NOT_IMPLEMENTED stubs -- meaning
vccli and any GUI client still couldn't actually talk. Implements the real
client-side UDP-binding handshake, media key derivation, capture->encode->seal->
send and recv->open->decode->playback paths, plus server-side StreamInfo
broadcast so peers learn about each other's streams via sync_remote_streams().
Adds test_voice_client_abi (two real vc_client instances, not raw sockets) and
vccli --voice/--mute/--text flags, manually verified live between two instances.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds the full voice pipeline: 14-byte binary frame header, ChaCha20-Poly1305
AEAD keyed from the TLS exporter, libopus encode/decode with FEC/PLC/DTX,
an adaptive per-ssrc jitter buffer, a miniaudio capture/playback engine, an
APM passthrough stub, and the UdpBinding/StreamAnnounce signaling chain
wired through ConnSession/SessionRegistry into a new server-side SFU
(MediaRelay) that decrypts and re-encrypts frames per channel member.
Exit criterion verified: test_m2_voice — two headless clients relay 50
encrypted Opus frames through the server; ctest --preset m1-dev is 9/9
green. Also corrects protocol.md's UdpBinding diagram, which described the
UDP-side binding packet as AEAD-sealed when it is in fact a plaintext
bootstrap frame (separate from the TCP/TLS UdpBinding ack).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Implements the full M1 milestone. Two clients authenticate over TLS 1.3
(guest + Argon2id password) and exchange channel + private text messages
through a real server. All five ctest --preset m1-dev tests pass in ~1 s.
Key components added:
- vcpkg baseline + m1-dev preset (protobuf/mbedTLS/libsodium/asio/sqlite3)
- FrameCodec feed+emit, encode/decode_envelope, protobuf codegen
- TcpServerConn with blocking TLS handshake thread + tls_read_loop
- TlsContext (mbedTLS 1.3, ECDSA-P256 self-signed cert, TOFU on client)
- WorkerPool (3 threads, used for Argon2id)
- Database: SQLite + libsodium Argon2id, account lifecycle, bootstrap admin
- ServerIdentityManager: Ed25519 key + cert generate/persist/fingerprint
- ConnSession state machine: WaitingHello -> WaitingAuth -> Authenticated
- SessionRegistry: channel tree, user map, text routing, broadcast
- vc_client full M1 C ABI: connect/TLS/handshake/auth/text/disconnect
- voicecat-admin CLI: account add/reset/del/list
- test_m1_integration: M1 exit criterion, verified green
Bug fixed: double-framing in ConnSession::send_envelope -- encode_envelope
was adding the [4-byte len] prefix, then TcpServerConn::send_frame added
a second one, causing the client to parse [len][proto] as protobuf (silent
failure). Fixed by serializing raw protobuf bytes in send_envelope and
letting send_frame apply the single length prefix.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Turn the design into a buildable, dependency-free M0 skeleton plus the
onboarding layer so a new agent can pick up instantly.
Build system:
- CMake + CMakePresets (dev = no deps; server-release = vcpkg) + vcpkg.json
- Skeleton builds with just a C++20 compiler; deps stay off until needed
- .gitattributes (LF), .gitignore, .clang-format
Core (libvoicecat):
- core/include/voicecat.h: full C ABI (the client/server contract), stubbed
- core/proto/voicecat.proto: control-plane wire format, matches docs/protocol.md
- src/{net,crypto,codec,protocol,session,audio,core}: subsystem stubs that
return VC_ERR_NOT_IMPLEMENTED, each pointing to its design doc
- server/ (voicecat-server) and tools/vccli/ link the core
- tests/: CTest smoke test asserting the C ABI contract (behavior, not just build)
- clients/{apple,windows}: M4 placeholders
Onboarding for agents:
- CLAUDE.md: hub — build/test commands, architecture at a glance, doc map, rules
- AGENTS.md: working method (behavior-driven; clean compile is the floor not the goal)
- PROGRESS.md: living tracker — M0 done, M1 task checklist, "where we left off"
Verified: cmake --preset dev && cmake --build --preset dev && ctest --preset dev → green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
