d904bafe7338d1d91995562b93d08bfb3d086bf1
5
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  EdnunpandClaude Opus 4.7
|
af0e7c3fff |
Bump to v3.0.0: Opus live latency, codec rename, profile-resume after update, save-through-lock
* New "Opus, live latency" codec mode: 2.5 ms frames (120 samples/ch at 48 kHz)
via the float-input encode path. End-to-end codec delay drops to ~5 ms (vs
~12.5 ms at standard 10 ms Opus). Test on LAN: 400 pps/lane, zero missed /
reordered / duplicate packets, ~15 ms one-way saved end-to-end.
* Wire-format change: AudioFormatInfo.FrameDurationMilliseconds renamed to
FrameSamplesPerChannel (int sample-count at announced sample rate). Removes
the lossy 48000*ms/1000 conversion that couldn't represent 2.5 ms. v3 <-> v3
exact; v3 <-> v2 still passes audio (Opus decoder is self-describing from
packet TOC) but v2 side over-sizes its buffer wildly. v2.x profiles auto-
migrate via <120 sentinel rule in RemSoundSettingsStore (anything below 120
is treated as legacy ms and multiplied by 48). Profile JSON key kept as
OpusFrameMilliseconds via [JsonPropertyName] so old profile files still load.
* Codec dropdown rebuilt with use-case names: "PCM 48K 24 bit - uncompressed",
"Opus, broadcast quality - loss tolerant", "Opus, live latency - for jamming
and monitoring". Middle 10 ms option retired; saved 480-sample profiles
collapse to broadcast quality (safer-side default).
* Profile auto-resume after self-update: RemSoundUpdater writes a one-shot
_resume-after-update.txt sentinel containing the active profile title before
exit; Program.Main reads + deletes it on next start and silently loads that
profile, skipping the picker. Helper batch's robocopy /XF excludes the
sentinel and the failure-branch cleans it up if the install aborts. Falls
through to normal startup behaviour (StartWithProfileTitle or picker) if the
sentinel is missing, empty, or names a profile that no longer exists.
* Read-only profile saves now go through on explicit Ctrl+S / File -> Save
with a one-time TaskDialog warning ("Save anyway" / "Cancel" + Do-not-show-
again). Lock continues to suppress the automatic unsaved-changes prompt on
close / profile switch (its main job). AppConfig.SaveOnReadOnlyMessageSuppressed
renamed to SaveOnReadOnlyWarningSuppressed; v2.x suppression flag is silently
discarded since the behaviour changed and the user needs to see the warning
once on each machine.
* Manual (readme.html) updated: codec table rewritten with the three new
choices and corrected bandwidth figures, send-rate description updated, new
sections "The same profile picks up automatically after an update" and
"Saving on purpose while a profile is locked".
* Subsumes the never-separately-released v2.2 work: native Opus encoder
(~97% less per-second memory churn on Opus send path via Concentus.Native),
efficiency tidy-ups (item 4 ASIO probe rate, item 6 WaitHandle, item 7
snapshot cache, items 14/16 heartbeat + discovery), legacy cleanup
(items 30/34/35/36: KeepAlive infrastructure, drift drop/repeat/accumulator
fields, fan-out cache stat). New diagnostic columns cpu/memMB/wsMB/
allocKBps/captureMs/sendMs/recvMs/renderMs gated on Enable-logs.
About dialog updated with v3.0 block at top; v2.2 block retained for the
subsumed work.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
|
||
|
Ednunp
|
79b28b6c02 |
Bump to v2.1.0: UPnP, read-only profile lock, sleep/hibernate audio fix
Headline features: * Automatic router port opening (UPnP / NAT-PMP / PCP). Opt-in via Preferences; surfaces external address + carrier-grade NAT detection. * Lock profile (read-only). New File-menu tick that makes a profile load-only — session changes don't persist, no save prompt on close. Unblocks unattended shutdowns (NVDA gone, remote dropped, hibernate) where the existing save prompt could deadlock. * Check for updates on startup (default on) + brief countdown notice before silent updates install, so a launch-time update doesn't make the app silently vanish. * "Cue sounds" -> "Audio cue sounds" label clarification. Bug fixes: * No sound after the computer wakes from sleep. PowerResumeHandler rebuilds the audio backend automatically on resume; brief "Reconnecting to audio driver" splash during the rebuild. * Receiver audio silent after waking from hibernate. RefreshAudioDeviceLists now treats a transient ASIO probe failure (returns -1/-1 because the driver is mid-teardown / mid-reinit) as "retry next tick" instead of clearing the user's tick selection. Diagnostic-only changes (gated on the existing Enable-logs checkbox, zero cost when off): * AudioStepProbe split into cross-buffer vs within-buffer maxes so log inspection can tell a real-content sharp transient apart from a pipeline-boundary glitch. Plumbed through every probe owner. * New rxNetGapMs + gc0/gc1/gc2 delta columns in the diag log to split receive-side jitter into network-layer vs managed-runtime causes. Files touched: RELEASE_NOTES.md + readme.html + 24 source files across RemSound.Core / RemSound.Sender / RemSound.Receiver / RemSound.App. Three new app files: PowerResumeHandler, RouterPortMapper, UpdateInstallNoticeDialog. Wire format and audio pipeline unchanged from v1.5 onward — v1.5 through v2.1 peers interoperate. |
||
|
EdnunpandClaude Opus 4.7
|
918ca6cac0 |
Bump to v1.6.0: peer-address recovery, reconnect crash, long-run memory/CPU leak
Three reliability fixes. Wire format and audio pipeline unchanged from v1.4 / v1.5 — all interoperate. Peer address recovery: * When a tracked peer goes Unreachable (its resolved address — often a stale DNS / Pi-hole record, or a peer that rebooted onto a new IP) but the same peer is still heartbeat-pinging us from a different address, RemSound now adopts the live address instead of transmitting to a dead one. HeartbeatService records untracked ping sources; MainForm's TryAdoptLiveHeartbeatAddress (1 Hz) re-points the sender, heartbeat tracking and receiver allow-list. Conservative: fires only on the unambiguous one-unreachable-and-one-source case, private-range (RFC1918) addresses only so a relay can't hijack the sender, 10 s cooldown. Reconnect crash: * Fixed IndexOutOfRangeException in MainForm.SyncConnectedList. A churny peer-list rebuild (peer reboot) left SelectedIndex pointing past the rebuilt item array; the 1 Hz status timer read SelectedItem and crashed the app. New SafeSelectedItem bounds-checks the index; applied to all three timer-driven sync methods. The status tick is also wrapped in try/catch so a transient WinForms hiccup logs instead of crashing. Long-run memory / CPU leak: * A receiver left running for hours grew to gigabytes and climbing CPU. Decoder sessions orphaned by peer reconnects were not reaped — every reconnect mints a fresh (endpoint, streamId) key, and PruneIdleSessions silently skipped sessions whose PlayoutEngine lookup missed. Rewrote it to reap on each session's own LastWriteUtc (no cross-dictionary lookup), added a hard MaxLiveSessions cap as a backstop, and a "stream sessions live: N" diagnostic line. Bounds both memory and render-thread CPU. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> |
||
|
EdnunpandClaude Opus 4.7
|
c59e413c1f |
Bump to v1.2.0: recording, sound cues, drift compensation, diagnostics
New user-facing features:
* Recording. Dedicated Record menu (Alt+O — moved from Alt+R to
avoid clashing with the Receive audio checkbox), Start/Stop on
Ctrl+R, settings dialog, per-profile source / format / bit-depth /
channel-mode / folder. Three source modes (received only, sent
only, both). Files are crash-resilient — a process crash
mid-recording leaves a playable file containing everything up to
the last header refresh (~5 seconds).
* Four output formats, all functional:
- WAV: 16/24-bit PCM or 32-bit float, custom writer with
periodic RIFF re-patching.
- MP3: LAME 128–320 kbps CBR (via NAudio.Lame).
- OGG-Opus: 96–256 kbps VBR (via Concentus.Oggfile, reusing the
Concentus encoder from the wire path).
- FLAC: 16/24-bit lossless (via CUETools.Codecs.FLAKE — pure
managed, no native DLL).
* Recording start/stop sound cues. record start.wav and
record stop.wav play around the recording transition. Played via
System.Media.SoundPlayer to the default Windows output, separate
from the recording pipeline so a normal recording does not contain
the cue.
* Per-cue Preferences. The old single "Mute connect/disconnect
sounds" checkbox is replaced by a CheckedListBox: Connect /
Disconnect / Recording start / Recording stop. Old profiles with
the legacy MuteConnectionCues=true are honoured on first load via
a migration path in the new Load* helpers.
* Receiver-side drift compensation switched from discrete
single-frame splices to a continuous WdlResampler at a smoothed
rate ratio. SessionPlayout.cs rewrite.
Diagnostics (only active with Enable logs ticked):
* Per-stage discontinuity probes — sender raw capture (per backend,
PushModeWasapi + Asio both wired), sender pre-encode (now per
lane in BothIndependent, fixing a cross-stream artefact), receiver
post-decode, post-ring, post-resampler.
* Wire-level packet sequence tracking on each PCM stream — in-order
/ missed / reordered / duplicated counts in the diag log.
* Clipped-sample delta in the diag log.
* New AudioStepProbe in RemSound.Core with per-channel scan helper.
UI changes:
* Record menu uses Alt+O (Rec&ord). Inside the menu, item mnemonics
unchanged (S / T / O / C).
* Auto-tune interval combo label is mode-aware: "Auto-tune latency
interval" in classic modes, "Auto-tune interval — WASAPI and ASIO"
in BothIndependent. The combo's Enabled state now follows EITHER
lane's auto-tune checkbox (was only the WASAPI one — bug).
Wire format and audio pipeline unchanged from v1.1 — v1.1 and v1.2
peers interoperate.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
|
||
|
Ednunp
|
17259438c6 | Initial commit: RemSound v1.0 |