RemoteStream::playout_ts was seeded to 0 and only advanced inside the
decode loop (including on every PLC iteration), so it free-ran at ~1x
wall-clock regardless of whether the sender was transmitting. The
sender's frame timestamps only advance while it actually sends (the
VAD/PTT gate returns before ls.timestamp += samples). Across a late join
or any VAD/PTT silence gap the two clocks diverged without bound; once
past the jitter buffer's 500 ms late-drop window every real frame was
dropped-as-late (clock ahead) or never-due (clock behind) -> permanent
silence, while the talk indicator (driven by push_recv_frame, independent
of the jitter buffer) stayed lit.
Add JitterBuffer::peek_front_ts() (try-lock, RT-safe) and seed/re-sync
playout_ts to the earliest buffered frame on the first frame and whenever
it has drifted past +/-200/500 ms. This seeds startup and recovers after
every silence gap.
New regression test test_playout_resync free-runs the clock ~2 s past the
drop window, pushes a ts=0 frame, and asserts audible output: fails
(energy=0) without the fix, passes with it. ctest --preset m1-dev: 14/14.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
AudioEngine::on_capture() was passing miniaudio's hardware callback period
(commonly 480 samples / 10 ms on WASAPI shared mode) directly to opus_encode(),
which requires exactly frame_samples_ (960 for 20 ms @ 48 kHz). The mismatch
returned OPUS_BAD_ARG and silently dropped every real mic frame, while screen
share and injected test frames happened to be correctly sized and worked fine.
Fix: accumulate PCM in a pre-allocated CaptureAccum buffer (mirroring the
existing RemoteStream::ring fix on the playback side) and only call capture_cb_
when a full frame_samples_ chunk is ready. Same pattern applied to on_loopback().
Add test_capture_frame_accumulation() to verify the accumulator fires exactly the
right number of callbacks for misaligned chunk sizes (480, 240+720, 1920 samples).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
on_playback() was passing miniaudio's hardware playback-callback frame
count to opus_decode()'s max_samples, instead of the decoder's fixed
frame size (960 samples @ 20ms/48kHz). Since real packets decode to
more samples than the (often smaller, e.g. ~480 on default low-latency
WASAPI) hardware period, opus_decode returned OPUS_BUFFER_TOO_SMALL on
nearly every callback -- packets were received/decrypted/jitter-buffered
correctly but never decoded into audible PCM. Result: control-plane
events and VAD worked, but zero audio in headphones.
mix_for_test()'s white-box test masked this since it always called
on_playback with frames == frame_samples, the one case where the bug
is invisible.
Fix: RemoteStream gained a small ring buffer (init_ring/push_ring/
pop_ring) that decouples decode cadence from playback-callback cadence.
on_playback now tops the ring up by decoding whole Opus frames (always
decoder.frame_samples(), never the hardware frame count) and drains
exactly what the callback asks for, silence-padding (PLC) on underrun.
Side effect: also fixes playout_ts, which was advancing by the wrong
unit (hardware frames instead of decoded samples) -- it now tracks
correctly against jitter-buffer timestamps.
ctest --test-dir build/m1-dev: 12/12 green.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- docs/building.md: explains what each CMake preset (dev, m1-dev, m2-dev,
server-release) is actually for, and how to build voicecat-server + vccli
for manual testing. Linked from CLAUDE.md's doc index.
- core/include/voicecat.h, core/src/voicecat.cpp, core/src/protocol/protocol.h,
server/src/main.cpp: doc-header comments still claimed M0-skeleton/stub
behavior (VC_ERR_NOT_IMPLEMENTED everywhere, "prints what it would do",
protobuf codegen "commented") that M1-M3 made real. Updated to describe
current behavior, with the dev-preset stub fallback noted explicitly where
it still applies.
Closes the three items PROGRESS.md's M3 section explicitly carried forward as
out of scope:
- Device enumeration (vc_list_devices) + input device selection
(vc_set_input_device), backed by AudioEngine::enumerate_devices() via
miniaudio's ma_context_get_devices. Device ids are opaque hex-encoded
ma_device_id strings.
- VAD/PTT send-side input gate (vc_set_input_mode, vc_set_push_to_talk).
webrtc-audio-processing (the originally-planned APM) has no working
Windows/MSVC build upstream (GCC-only Meson, unfinished MinGW support, hard
abseil-cpp dependency), so VAD is a new lightweight, dependency-free
energy/RMS processor (EnergyVadProcessor) behind the existing ApmProcessor
interface. Gating is MIC-only; SCREEN_AUDIO/AUX_DEVICE always bypass it.
- True stereo playback: AudioEngine's mixer and output device now carry
stereo end-to-end (mono streams upmix L=R) instead of downmixing decoded
stereo streams to mono before mixing.
- Real WASAPI loopback capture for SCREEN_AUDIO (Windows-only, via
miniaudio's loopback device type), replacing test-only injection as the
production capture path.
Also: vccli gains --list-devices, --input-device, --input-mode, and
--share-screen-audio flags, plus a stdin command loop (ptt on/off, mode
vad/ptt) for manual verification. New test_vad_ptt_devices.cpp covers all
four items (ABI-level + a white-box AudioEngine stereo-mix check).
Docs updated to match: voice.md, roadmap.md (decision-log entry superseding
the original webrtc-audio-processing choice), tech-stack.md, README.md,
architecture.md, CLAUDE.md, PROGRESS.md.
Still explicitly out of scope, documented not silently dropped: real
webrtc-audio-processing/AEC (no AEC/NS/AGC exists at all yet), macOS/iOS
SCREEN_AUDIO capture, process-specific loopback, and a pre-existing
RT-thread rule violation in the capture path that predates this work.
Verified: ctest 12/12 green across 3 consecutive full-suite runs (both dev
and m1-dev presets build clean); test_vad_ptt_devices passed 5 consecutive
standalone runs; manually verified live (vccli --list-devices against real
hardware, vccli --voice --input-mode vad streaming without incident).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Implements docs/roadmap.md M3: multiple concurrent streams per user (MIC +
SCREEN_AUDIO + AUX_DEVICE), independent per-stream receiver gain/mute/noise-
reduction, talk indicators, and enforced per-channel Opus configurability
(mono/stereo, bitrate, frame size, FEC/DTX, application).
Bugs fixed along the way (found while implementing, not pre-existing scope):
- Server hard-coded stream_id=1 for every announce, so a second stream from
the same user silently overwrote the first in SessionRegistry::set_user_stream.
Now a per-session counter (ConnSession::next_stream_id_); handle_stream_stop
validates against announced_stream_ids_ before clearing.
- Client dropped mode/dtx/complexity/application from effective_audio even for
the single M2 stream -- only sample_rate/bitrate_bps/frame_ms/fec were ever
applied to OpusParams. Fixed on both the send (handle_stream_announce_result)
and receive (sync_remote_streams) paths via a shared
opus_params_from_audio_config() helper.
- OpusEncoder always used OPUS_APPLICATION_VOIP; added OpusParams::application
and wired it through.
- on_playback's per-stream decode passed the wrong frame_size to opus_decode
(total samples instead of samples-per-channel), which would have overflowed
the decode buffer for any stereo stream.
- teardown_voice() raced when called concurrently from run_io()'s own cleanup
and from disconnect() on a different thread -- both could see
udp_thread_/talk_timer_thread_ as joinable() at once and race to join() the
same std::thread (intermittent std::system_error under ctest). Fixed with a
teardown_mu_ guard instead of carrying the flake forward.
New:
- Per-channel AudioConfig: SessionRegistry now seeds Lobby (mono/24kbps/VOIP/
FEC+DTX) and a new "Music Room" channel (stereo/128kbps/AUDIO/no DTX);
handle_stream_announce enforces the channel's config, clamping (not
overriding) bitrate_bps to its ceiling.
- core/src/core/client.h/.cpp: local-stream state is now a
std::unordered_map<int, LocalStream> keyed by vc_stream_kind, with
request_id-correlated announce/result handling (request_id already
round-tripped on the wire; just wasn't read before). on_capture_frame is
kind-aware and upmixes mono capture to stereo when a stream's config calls
for it. set_self_mute's mic_muted now only gates the MIC kind. NS is wired
through set_remote_stream. New run_talk_timer() thread emits
VC_EVENT_TALK_STATE from both remote and local edge detection.
- core/src/audio/audio_engine.h/.cpp: kind-keyed injection taps
(inject_capture), stereo-to-mono downmix at the decode/mix boundary,
RemoteStream gains recv_ns (lazy ApmProcessor) + noise_reduction_enabled
and last_voice_ms/talking; new set_stream_noise_reduction() and
poll_talk_transitions().
- core/src/session/session.h/.cpp: Stream now carries the full AudioConfig,
not just sample_rate/frame_ms.
- New additive C ABI (core/include/voicecat.h): vc_audio_config +
vc_get_stream_audio_config (effective Opus config for any stream you own or
a peer's); vc_test_inject_capture (test-only synthetic PCM injection,
clearly marked, mirrors AudioEngine::inject_capture).
- tests/test_m3_multistream.cpp: the M3 exit criterion through the real ABI
(mirrors test_voice_client_abi.cpp's approach, not raw sockets) -- two
concurrent local streams, independent gain/mute/NS control, per-channel
config divergence via vc_get_stream_audio_config, talk indicators.
Explicitly out of scope for this pass (tracked in PROGRESS.md, not silently
dropped): VAD/PTT input gate + device enumeration; real WASAPI loopback
capture for SCREEN_AUDIO (synthetic injection only); true stereo playback
output (AudioEngine's mixer/output device stays mono -- Opus itself is fully
stereo-correct on the wire).
ctest --test-dir build/m1-dev: 11/11 green, verified across 3 consecutive
full-suite runs plus 8 standalone runs of the new test.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
test_m2_voice passed against raw BSD sockets, but vc_client::stream_start/stop,
UDP binding, and capture/recv were still VC_ERR_NOT_IMPLEMENTED stubs -- meaning
vccli and any GUI client still couldn't actually talk. Implements the real
client-side UDP-binding handshake, media key derivation, capture->encode->seal->
send and recv->open->decode->playback paths, plus server-side StreamInfo
broadcast so peers learn about each other's streams via sync_remote_streams().
Adds test_voice_client_abi (two real vc_client instances, not raw sockets) and
vccli --voice/--mute/--text flags, manually verified live between two instances.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds the full voice pipeline: 14-byte binary frame header, ChaCha20-Poly1305
AEAD keyed from the TLS exporter, libopus encode/decode with FEC/PLC/DTX,
an adaptive per-ssrc jitter buffer, a miniaudio capture/playback engine, an
APM passthrough stub, and the UdpBinding/StreamAnnounce signaling chain
wired through ConnSession/SessionRegistry into a new server-side SFU
(MediaRelay) that decrypts and re-encrypts frames per channel member.
Exit criterion verified: test_m2_voice — two headless clients relay 50
encrypted Opus frames through the server; ctest --preset m1-dev is 9/9
green. Also corrects protocol.md's UdpBinding diagram, which described the
UDP-side binding packet as AEAD-sealed when it is in fact a plaintext
bootstrap frame (separate from the TCP/TLS UdpBinding ack).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Implements the full M1 milestone. Two clients authenticate over TLS 1.3
(guest + Argon2id password) and exchange channel + private text messages
through a real server. All five ctest --preset m1-dev tests pass in ~1 s.
Key components added:
- vcpkg baseline + m1-dev preset (protobuf/mbedTLS/libsodium/asio/sqlite3)
- FrameCodec feed+emit, encode/decode_envelope, protobuf codegen
- TcpServerConn with blocking TLS handshake thread + tls_read_loop
- TlsContext (mbedTLS 1.3, ECDSA-P256 self-signed cert, TOFU on client)
- WorkerPool (3 threads, used for Argon2id)
- Database: SQLite + libsodium Argon2id, account lifecycle, bootstrap admin
- ServerIdentityManager: Ed25519 key + cert generate/persist/fingerprint
- ConnSession state machine: WaitingHello -> WaitingAuth -> Authenticated
- SessionRegistry: channel tree, user map, text routing, broadcast
- vc_client full M1 C ABI: connect/TLS/handshake/auth/text/disconnect
- voicecat-admin CLI: account add/reset/del/list
- test_m1_integration: M1 exit criterion, verified green
Bug fixed: double-framing in ConnSession::send_envelope -- encode_envelope
was adding the [4-byte len] prefix, then TcpServerConn::send_frame added
a second one, causing the client to parse [len][proto] as protobuf (silent
failure). Fixed by serializing raw protobuf bytes in send_envelope and
letting send_frame apply the single length prefix.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Turn the design into a buildable, dependency-free M0 skeleton plus the
onboarding layer so a new agent can pick up instantly.
Build system:
- CMake + CMakePresets (dev = no deps; server-release = vcpkg) + vcpkg.json
- Skeleton builds with just a C++20 compiler; deps stay off until needed
- .gitattributes (LF), .gitignore, .clang-format
Core (libvoicecat):
- core/include/voicecat.h: full C ABI (the client/server contract), stubbed
- core/proto/voicecat.proto: control-plane wire format, matches docs/protocol.md
- src/{net,crypto,codec,protocol,session,audio,core}: subsystem stubs that
return VC_ERR_NOT_IMPLEMENTED, each pointing to its design doc
- server/ (voicecat-server) and tools/vccli/ link the core
- tests/: CTest smoke test asserting the C ABI contract (behavior, not just build)
- clients/{apple,windows}: M4 placeholders
Onboarding for agents:
- CLAUDE.md: hub — build/test commands, architecture at a glance, doc map, rules
- AGENTS.md: working method (behavior-driven; clean compile is the floor not the goal)
- PROGRESS.md: living tracker — M0 done, M1 task checklist, "where we left off"
Verified: cmake --preset dev && cmake --build --preset dev && ctest --preset dev → green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
