On iOS the remote end heard the mic twice and crackly (BT headset + internal
mic in Voice Chat; mono + stereo copies of the internal mic in Stereo Mic).
Root cause is an io-thread ordering race. `ensure_audio_running()` only set
`external_capture` when a MIC stream already existed, but it also runs from
`sync_remote_streams` on the post-auth `ServerStateSnapshot` — before the user
joins voice. With `external_playback_` still false and no MIC stream,
`AudioEngine::start()` opened a real miniaudio capture device that stayed open
all session (later calls early-return on running()), racing the AVAudioEngine
input tap fed via `vc_stream_feed_pcm`. `on_capture_frame` then encoded+sent
both paths — the mic transmitted twice, the two unsynchronized capture clocks
producing the crackle.
- core (ensure_audio_running): force `external_capture = true` whenever
`external_playback_` is set, so iOS unified mode never opens a hardware
capture device. No-op on desktop.
- ios (AppState): move `setExternalPlayback(true)` before `connect()`, so the
flag is set before the io thread processes any message — closing the race.
Verified on device: remote end hears the iOS mic once and clean in both Voice
Chat (+ BT) and Stereo Mic.
The iOS audio path was a hybrid: Voice-Chat-class presets ran a native
VPIO AVAudioEngine (core external) while Stereo/Studio/A2DP presets ran
the core's miniaudio devices. Nearly every "no input / no output / both"
bug lived in the seam between the two paths — the lingering miniaudio
capture unit fighting VPIO, the audioRestart ordering dance, the
route-change "glitching" loop, stereo<->mono stickiness, and
"can't hear anyone". Switching presets/routes mid-call routinely dropped
a direction.
Drive ALL iOS audio through one AVAudioEngine with the core fully
external at all times: setExternalPlayback(1) once at connect, every MIC
stream external_feed=1, mic via vc_stream_feed_pcm, playback via
vc_set_mixed_output_sink (drained by an always-on AVAudioSourceNode so
remote audio plays before joining voice). VPIO + AGC toggle per preset.
Every preset/route/interruption change funnels through one deterministic
Swift-only reconfigure (stop -> apply session config -> rebuild -> start)
— no second path to hand off to, so a change can't drop a direction.
- IOSVoiceProcessingEngine.swift -> IOSAudioEngine: always-on source-node
playback, conditional mic tap, VPIO/AGC; one rebuild() backing
startListening/stop/startMic/stopMic/reconfigure/setCaptureChannels.
- IOSAudioRouter: 7 presets -> 4 (Voice Chat / Stereo Mic / Mono Mic /
Advanced); persisted voiceProcessingEnabled + agcEnabled; setters call
IOSAudioEngine.reconfigure() instead of audioRestart/reconcileVoicePath.
- AudioSessionManager slimmed; SessionState mic lifecycle collapsed;
AppState wires external playback + listening at connect, stop at
disconnect; SettingsView shows 4 presets + Advanced VPIO/AGC toggles.
No core/ABI/test changes — relies on the already-shipped external API
(test_external_pcm, test_external_playback). xcodebuild iOS device Debug
BUILD SUCCEEDED. Updates docs/voice.md §8 and PROGRESS.md.
Add audible cues and optional spoken announcements for session events
(join/leave, channel + PM sent/recv, login, logout/connection-lost,
mic on/off, voice-activity, PTT) across all three clients, driven off
the shared C ABI vc_event stream so the mapping stays consistent.
TTS is off by default; when enabled it announces events and reads
message/PM bodies aloud. Master toggles + a sound-volume slider; the
per-utterance voice-activity and PTT cues default off. WAVs ship from
assets/sounds/.
Windows (built + verified): new VoiceCat.App/Notifications/ layer
(FeedbackSettings -> %AppData%\VoiceCat\feedback.json, SoundPlayerPool
via System.Media.SoundPlayer, SpeechAnnouncer via Prismatoid 0.3.0,
EventFeedback dispatcher); MainForm hooks; NotificationSettingsForm
under Settings > Notifications; csproj adds the Prismatoid PackageRef
and copies the WAVs into sounds\.
macOS + iOS (written, not yet built -- needs a Mac): shared
VoiceCatCore/Feedback/ (SoundEvent, EventFeedback = AVAudioPlayer pool
+ native AVSpeechSynthesizer, FeedbackSettings over UserDefaults); WAVs
bundled via Package.swift resources (.process). Hooks in SessionState/
AppState (iOS) and MainWindowController (macOS); settings UI in
SettingsView (iOS) and SettingsWindowController (macOS).
No core/server code touched; ctest --preset dev unaffected.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Channel create/edit UIs only surfaced a subset of the core's vc_audio_config,
and DRED was exposed nowhere. While adding it, found a latent ABI mismatch:
both Swift AudioConfig and the C# VcAudioConfigNative blittable struct were one
int short of the native vc_audio_config (missing the trailing `dred`), so native
read past the managed struct in vc_create_channel/vc_edit_channel.
- core marshaling: thread `dred` through Swift (Models/Marshaling/toNative) and
C# (Structs/Models/Marshaling/VoiceCatClient) -- fixes the ABI gap + enables it
- windows: add the one missing DRED checkbox to ChannelEditDialog
- macos: ChannelEditSheet now exposes application, sample rate, packet loss,
complexity, and DRED (was stereo/bitrate/frame/FEC/DTX only)
- ios: rebuild ChannelEditView into a full create+edit form (all params); add
SessionState.editChannel + an admin Edit swipe action (iOS had no edit UI)
- guest nickname: add a dedicated `nickname` to SavedServer on macOS+iOS
(backward-compatible Codable), shown in Guest mode, wired into the guest auth
path -- guests could not set a display name on either before (only Windows)
Verified: macOS + iOS (sim, arm64) xcodebuild BUILD SUCCEEDED; core ctest 22/23
(only external_pcm aborts on a pre-existing shutdown mutex race; no C++ changed).
Implement system/desktop audio sharing on the Apple clients, feeding the
existing SCREEN_AUDIO Opus -> AEAD -> UDP path via vc_stream_feed_pcm. No
C++/protocol/codec changes -- the core was already ready (the Windows-only
loopback is #ifdef VOICECAT_HAS_LOOPBACK; off Windows the stream just waits
for fed PCM). Audio only; video is dropped.
macOS (in-process):
- ScreenAudioCapture.swift drives an audio-only SCStream
(excludesCurrentProcessAudio), converts Float32 -> int16 in the channel's
mono/stereo mode, and calls feedPcm. Capture starts on the self
.streamStarted event (effective config known then). Wired into
MainWindowController.screenAudioClicked().
iOS (forward-to-host, single session):
- VoiceCatBroadcast: a ReplayKit Broadcast Upload Extension consumes
.audioApp only, resamples to 48kHz int16 stereo (AVAudioConverter), and
writes a shared App Group SPSC ring (BroadcastAudioRing.swift). It does
not link libvoicecat.
- Host BroadcastAudioPump drains the ring (reacting to the extension's
Darwin notifications) and feeds the SCREEN_AUDIO stream it owns, downmixing
to mono when the channel is mono. Screen audio appears as a second stream
of the same user; no credentials persisted. UI is RPSystemBroadcastPicker
View in VoiceControlsView. Removes the speculative BroadcastCredentials.
Docs: voice.md s9, CLAUDE.md status, PROGRESS.md.
Diagnosed by comparing against TeamTalk5 (Client/iTeamTalk), which
achieves stereo mic + A2DP output. Five fixes:
1. configureStereoCapture now calls setPreferredInput +
setInputDataSource (mirroring TeamTalk5's SoundDevicesModel).
Previously omitted based on incorrect diagnosis that
setPreferredInput collapsed A2DP — the real culprit was
setPreferredInputNumberOfChannels(2), which neither project uses.
2. New C ABI: vc_audio_restart (full stop + re-init, unlike
suspend/resume which only stop/start). Swift wrapper added.
The withAudioSuspend wrapper that used it was removed after
on-device testing showed it killed all audio (including
VoiceOver) when switching presets — the core's
set_capture_channels handles engine restart internally.
3. Bluetooth options: Voice Chat preset now includes BOTH
.allowBluetoothHFP AND .allowBluetoothA2DP (matching TeamTalk5's
UtilSound.swift:228). Previously HFP-only blocked A2DP headphones.
4. Capture channels now reset when switching stereo→mono via
selectCaptureChannels/applyPreset. AudioSessionManager tracks
activeMicStreamId (set by SessionState on join/leave voice).
5. Docs synced: voice.md, tech-stack.md, architecture.md,
PROGRESS.md. Removed stale setPreferredInputNumberOfChannels(2)
references.
Verified: ctest --preset dev 21/21 green, iOS client builds.
Stereo mic + A2DP output still needs on-device debugging — the
core recipe is correct but iOS 26 route behavior requires
hands-on testing with a debugger.
Three bugs causing no audio output and no mic input:
1. .voiceChat mode + A2DP = output muted. The .voiceChat mode uses hardware
AEC/AGC/HPF but requires HFP-compatible routes. A2DP is NOT HFP — iOS
mutes the output because it can't set up the voice processing pipeline on
an A2DP route. Fix: use .default mode for Standard+A2DP (no hardware AEC,
but audio routes correctly). .voiceChat kept for HFP and speaker modes.
Added info warning in Settings UI for A2DP no-AEC.
2. Session lifecycle broken. stopMicStream() called deactivateAfterStreaming()
which deactivated the AVAudioSession — but the AudioEngine keeps running for
remote audio playback, so leaving voice killed all remote audio. And the
session was never activated when a remote user started talking (only on
Join Voice), so you couldn't hear anyone before joining voice. Fix:
- ensureSessionActive() replaces activateForStreaming() — idempotent, called
on Join Voice AND on .streamStarted (remote user starts talking).
- stopMicStream() no longer deactivates the session.
- deactivateSession() called only on disconnect from server.
- isSessionActive flag tracks state, updated by interruption handler.
3. setPreferredInputNumberOfChannels(1) called for mono — unnecessary (1 is
the default) and may put the session in a bad state on some devices. Fix:
only call it when stereo is explicitly selected. Also handle empty input
port ID (selecting 'Default' in the picker) correctly.
Added comprehensive route logging — after activation, logs the current output
and input route names so issues can be diagnosed from Console.app.
Full SwiftUI app at clients/apple/iOS/VoiceCatiOS.xcodeproj:
- 24 Swift source files: AppState + SessionState (@Observable @MainActor),
AudioSessionManager (AVAudioSession owner + interruption/route handling),
ServerListStore/SavedServer (App Group container + Keychain sharing),
and 14 SwiftUI views covering the full feature set
- NavigationSplitView on iPad, TabView on iPhone (horizontalSizeClass)
- Channel tree via OutlineGroup, user list with context menu admin actions
- PTT via DragGesture(minimumDistance: 0) + @GestureState
- onEvent closures hop to MainActor via Task { @MainActor in ... }
- App Group: group.cat.voice.VoiceCat (shared with future ReplayKit extension)
C ABI: add vc_audio_suspend / vc_audio_resume (AudioEngine::suspend/resume)
called by AudioSessionManager on AVAudioSession interruption events.
XCFramework: add ios-arm64 and ios-arm64-simulator slices to build-xcframework.sh;
Package.swift gains .iOS(.v17) platform; CMakePresets.json adds apple-ios /
apple-ios-sim presets with arm64-ios / arm64-ios-simulator vcpkg triplets.
Verified: xcodebuild -target VoiceCatiOS -sdk iphonesimulator26.5 BUILD SUCCEEDED.
