Add band dialog (from testing feedback):
* Tab order is now Start, End, Gain, OK, Cancel (OK was after Cancel).
* Gain box takes decimals like 1.5 (half-dB steps); parametric list shows one decimal.
* The two frequency boxes start empty — nothing prepopulated to mislead; both required on OK.
New Connectivity-tab feature (held for next release):
* Rename peer (Alt+M) opens a dialog to give a peer a friendly name, with a Clear custom name
button. Names are keyed by the peer's MACHINE NAME (stable across restarts, IP changes and
networks), stored machine-wide in AppConfig.PeerFriendlyNames, and resolved everywhere a peer
shows: both peer lists (via PeerListItem.DisplayNameProvider), the volume/pan/EQ list, the
status line and split-recording filenames. Manual-by-IP peers with no announced name fall back
to keying by address.
* Peer details (Alt+E): a read-only box for the highlighted connected peer showing name, machine
name, IP, connected-for, link health + ping, what they're sending, and whether they're
receiving our audio. "Sending: 2 devices on ASIO at 48 kHz, Opus" is derived from the live
receive streams — each stream is one device and its lane gives WASAPI vs ASIO — so NO protocol
change and no new privacy exposure. AudioReceiver.ActiveFormatsFromAddress added for this.
Manual updated (readme.html + MANUAL.md). Build clean; --selftest passes; deployed to both test
folders. Held for next release.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Reworks the per-peer shaping tab (held for next release):
* Renamed the tab to "Volume, pan and EQ for peers"; the Preferences toggle now defaults ON.
* Collapsed the two master switches (Enable EQ / Enable pan) into ONE: "Enable volume, pan and
EQ for all peers" (Alt+E). Volume now obeys it too. PeerDspChain.Build takes a single enabled
flag; Profile.EnableAllPeerShaping replaces the two bools (old ones kept for load-migration).
* Peer picker is now a CheckedListBox: ticking a peer shapes them (per-peer bypass via new
PeerShaping.Enabled, default true); the focused row is the one the controls edit. Effective
shaping = master switch AND that peer's tick. Letter-nav suppressed so keys never toggle a tick.
* Three EQ modes, renamed: "3 band simple EQ", "12 band advanced graphic EQ", and the new
"16 band parametric EQ" (PeerEqMode.Parametric16Band).
* Parametric EQ: up to 16 user bands, each a boost/cut across a start->end range (PeerShaping
.ParametricBands; ParametricToPeaking maps range -> peaking centre+Q, shared by DSP and curve).
Add band dialog (spin-or-type, numeric-only, live preview, OK/Escape); Bands list sorted
bass->treble reading "X Hz to Y Hz, plus/minus N dB"; Delete key / Delete button, multi-select.
Set peer EQ to default clears the parametric list too.
* dB now spoken as words ("plus 3 dB" / "minus 6 dB" / "flat") on the graphic sliders and the
parametric list, since NVDA users typically have punctuation off and never hear a "+".
* New unbound machine-wide global shortcut "Toggle volume, pan and EQ for all peers" (not stored
in any profile) via the hotkey controller + settings store.
* Renamed the Inputs/outputs "Set volume for all received audio" to "Master receive volume".
* Added EqCurveControl: a purely-visual EQ response graph (not focusable, invisible to NVDA).
* Full manual sweep (readme.html + regenerated MANUAL.md).
Build clean; --selftest passes. Deployed to both test folders. Held for next release.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Full sweep of readme.html (regenerated MANUAL.md) for the held batch:
* New section 9 "Pan and EQ tab" — per-peer volume/pan/EQ, the two master switches, the peer
picker, 3-band and 12-band (31/63/80/125/250/500 Hz, 1/2/4/6/8/16 kHz) EQ, reset button,
real-time, saved per profile; shown via the "Show the Pan and EQ tab" Preferences checkbox.
Sections 9-24 renumbered to 10-25; TOC entry added.
* Recording section: the two new tickboxes (split into per-peer tracks; bypass pan/EQ for raw),
and the new date-folder / "<time> RemSound recording <machine>" / multi-track-folder naming.
* Section 4 tab list, keyboard-shortcuts (Pan and EQ tab: Alt+E/P/U/L/N/Q/M), and a Preferences
mention. Replaced a stale old-format recording-filename example.
Held for next release.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Feature request from the same singer: a way to pin a profile to exact peer addresses
so RemSound never matches the other computer by its advertised name and never switches
to a different address it discovers — for a machine reachable at two addresses at once
(VPN + LAN), they want only the one they chose, and would rather the connection die than
wander. The logical end of the v4.7/v4.8 direction.
New per-profile Profile.LockPeerAddresses (default false), round-tripped through
RemSoundSettingsStore (ApplyProfile/CopyTo + Load/SaveLockPeerAddresses), mirroring the
PriorityMode pattern. New AccessibleCheckBox on the Connectivity tab ("Lock to these exact
peer addresses, no matter what — never follow names or switch", Alt+L), saved with the
profile, marks the profile dirty on change. When set, RefreshKnownPeers early-returns
before the discovered-peer merge and the address-follow, so the profile's peers stay
exactly as set (the allow-list is still pushed). Off = unchanged behaviour.
Manual: rewrote the "Connecting to one specific IP" section (which over-promised that
add-by-IP "can never drift" — the merge/follow could) into an unambiguous "Locking a
profile to one exact address" section, plus a Connectivity-tab control-table row.
Held for the next release.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The same singer hit a rare crash: their transmitter (COMP3) was reachable at two
addresses at once — the VPN address 10.8.0.1 they chose and that machine's wireless
192.168.3.245 — and the discovery-driven endpoint-follow ping-ponged the connection
between the two (the log shows four moves in 58 ms) right where the process died with
no shutdown line, no managed exception, no dialog: a hard crash from the receiver
audio-session teardown/rebuild churn the thrash caused.
Fix: the follow loop now never moves off an endpoint that's still answering heartbeats,
only follows once the current one has been unreachable for a sustained grace period
(6 s), only to an address that is itself answering, and never more than once per cooldown
(15 s) — so it can't thrash, and a peer reached on a working address stays put (honours
the singer's "just stay on 10.8.0.1"). New endpointUnreachableSinceUtc + lastEndpointMoveUtc
state; genuine DHCP/network moves are still followed a few seconds later.
Also: a global crash handler (Program.WriteCrashReport on AppDomain.UnhandledException +
TaskScheduler.UnobservedTaskException) writes a crash-*.txt into the logs folder, so a
future "RemSound just vanished" report leaves a stack behind. Removed a stale doc comment
left over from the v4.7 adoption removal. Manual gains a "RemSound closed unexpectedly"
troubleshooting entry. Version 4.8; About + RELEASE_NOTES updated.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Removes the heartbeat "adopt a live address" feature (added v1.6). On a LAN with
more than one RemSound machine it could latch a receiver onto an unrelated sender
that happened to be pinging the audio port — then never recover to the real peer,
needing a manual restart (the singer's #15, with log). The feature guessed peer
identity from an untracked ping source with no way to verify it was the same peer;
on the stable VPN/LAN addresses RemSound is actually used with, it only ever caused
harm, since same-address reconnect already works via the continuous heartbeat.
Removed TryAdoptLiveHeartbeatAddress + IsPrivateLanAddress (MainForm) and
GetUntrackedPingSources + recentPingSources (HeartbeatService); the identity-safe
discovery-based following (by verified peer ID) stays. Manual troubleshooting entry
rewritten to match.
Also bundles the held changes since v4.6: status reads line-by-line with GB totals
and double-press-to-copy, CPU/memory in the status, the Install Scripts folder, and
the what's-new-after-failed-update fix. Version 4.7; About + RELEASE_NOTES updated.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Andre confirmed (via NVDA speech history) that holding the speak-status hotkey
doesn't repeat or spam — so the defensive toggle that let users disable the
double-press-to-copy was needless configurability. Removed the Preferences
checkbox and the DoublePressStatusToCopy setting; double-press-to-copy (Andre's
own idea) stays, now simply always on. There was never any debounce/anti-spam
code to remove — the only timing is the 600 ms double-tap detection window, which
is the feature itself. Manual updated to drop the toggle line.
Held for the next release (the toggle never shipped).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The manual intro and the repo README both carried an invented origin (a guitarist
and singer playing together, "built by a sound designer"). RemSound was actually
built to hear the audio from a powerful computer while working remotely from a
lighter one — other programs can move audio between PCs, but none did it quite the
way Ed wanted. Reworded the manual opening (readme.html) and the README audience
and "Who made this" lines to tell one true, consistent story in Ed's voice. The
music-together and podcast uses stay as the genuine secondary use cases they are.
readme.html ships to users on the next release; README/MANUAL update on push.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
New last status line "CPU usage 2% and memory 184 MB" — CPU as a share of the whole machine
(Task Manager style: process CPU-time delta / wall-clock / logical-core count), memory as the
working set via the same MB-to-GB formatter the totals use. Sampled on the existing once-a-second
status tick with a cached Process handle. Shows on screen and reads/copies with the rest of the
status (Ed's idea).
Held for the next release.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Preferences General-tab checkbox "Double-press the speak-status hotkey to copy the status to the
clipboard" (Alt+C), machine-wide (AppConfig.DoublePressStatusToCopy), on by default. When off, a
double press just reads the status again. SpeakStatusLine reads the flag only when the timing already
qualifies, so a normal single press never touches the config. Manual's speak-status section now
covers the line-by-line read, GB totals, and the double-press copy + its toggle.
Held for the next release.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
RemSound is a .NET 10 app, so it can't install its own runtime — it can't start without it. A
plain .cmd/.ps1 (which run on what's already in Windows) sidesteps that: double-click
"Install Scripts\Install .NET for RemSound.cmd" and it winget-installs the .NET 10 Desktop Runtime
(Microsoft.DotNet.DesktopRuntime.10), falling back to opening Microsoft's download page if winget
is absent. Modelled on Andre Louis's accessible-sensor-readout Install_Scripts (his install .NET
Framework 4.8 because SR is Framework; ours installs the .NET 10 Desktop Runtime RemSound needs).
Bundled into the build + release zip via csproj Content + EnsureInstallScriptsPublished target.
Manual Quick-start note points users here if RemSound won't start. Held for the next release.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- New "Use Windows default audio device, follows Windows changes" entry at the top of the
received-output and send-input WASAPI lists. Resolves the current Windows default live,
re-routes automatically when the default device changes, works alongside specific devices,
and persists across launches (a follower can't go stale). Optional "untick the others?"
prompt with a remembered "don't ask again", reset via a new Options item "Reset the default
audio device prompt".
- Manual updated for the feature, plus a sweep that corrected the now-stale Options-menu
section (retired Startup-behaviour item, four->five Preferences tabs, missing entries).
About changelog and RELEASE_NOTES updated; version 4.6.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Pre-v4.4 upgraders are offered a one-time dialog to copy their keyboard shortcuts
from one of their profiles (still readable in the profile files) instead of being
reset. Users who already went through v4.4's reset are deliberately NOT re-offered
(gated on KeyboardShortcutsGlobalNoticeShown). New KeyboardShortcutImportDialog +
AppConfig.KeyboardShortcutsImportOffered + MainFormHotkeyController.ReloadAndReRegisterAll.
- Keyboard shortcuts dialog: new "Clear this shortcut" button; Delete inside the
capture box leaves a shortcut unassigned.
- Relabelled the three RemSound-app remote rows to "Send remote RemSound volume/..."
to distinguish them from the Windows-global ones.
- Manual (readme.html + MANUAL.md), About changelog, RELEASE_NOTES updated; version 4.5.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Fixes issue #14: shortcuts were stored on each Profile, so one set on profile A
didn't apply on profile B and seemed to vanish on switch. They now live in
AppConfig (one set shared by every profile). RemSoundSettingsStore's Load*/Save*
hotkey methods re-point to AppConfig (callers unchanged); the per-profile cache
fields, profile load/save plumbing, and the HotkeySetting helper class are removed.
Profile's HotkeyRecord fields stay only for back-compat deserialization.
On upgrade, shortcuts reset to defaults (there's no single correct set to carry over
since profiles could hold different/partial sets). A one-time startup notice tells
upgraders to re-set them; fresh installs are silently marked done (nothing to reset).
Manual, About changelog and RELEASE_NOTES updated; csproj <Version> 4.4.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- New screen-reader hotkey "Speak the RemSound status information" (issue #13):
reads the status line aloud through the active screen reader via Tolk, fires from
anywhere (system-wide), unset by default. Built behind an IScreenReaderOutput seam
so a future build can swap Tolk for Prism on Windows 10+ without touching callers.
Tolk DLLs vendored under tolk/ and shipped next to the exe.
- New Logging tab in Preferences: Enable logs + Write logs now moved there, plus
opt-in startup "warn if logs folder exceeds N MB" and "delete logs older than N days",
and a "Delete all logs" button (Yes/No confirm). New LogMaintenance helper + AppConfig
settings drive it.
- Manual (readme.html + regenerated MANUAL.md), About changelog and RELEASE_NOTES
updated in plain English; csproj <Version> bumped to 4.3.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Audio cues
- Cues for send/receive on-off, minimise/restore, checkbox tick/untick, and tab switch
- Soft keyboard clicks while typing, with a distinct passkey sound on password fields
- Per-cue "Choose sound" variant picker; "(none)" silences a cue; front-most missing-sound warning
- Send/receive cues take priority over the generic checkbox sound; programmatic ticks stay silent
Preferences
- Redesigned into four tabs (General, Audio cues, Startup behaviour, Update settings)
- Startup behaviour moved in from the Options menu
- NVDA now announces the dialog on open (focus a real named control, not the quiet tab control)
Auto-tune
- Cause-aware: tells device render-callback stalls (more buffer can't fix) apart from genuine
network/buffer starvation, so it no longer pins latency high on chunky onboard cards
- Lowering the target eases the buffer down (glide) instead of trimming it, so no clicks while tuning
Sounds layout
- Shipped defaults moved out of the per-user folder into an install-side "default sounds" folder,
so updates can refresh them; user customs are Browse-picked file paths and are left untouched
- Startup migration removes both legacy sound folders; verified from oldest (v1.0-v3.3) and v3.4 layouts
Quiet automated launches
- New --silent launch flag mutes all cue sounds and suppresses the startup dialogs (migration notice,
update check, Realtek/mic/missing-sound warnings) so test launches never disturb the user
- run-tests / build-release / SelfTest repointed to the new "default sounds" layout
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Audio cues section rewritten for the redesign: the cue list is a plain list you arrow through to
hear each cue, the "Choose sound" list's "(none)" entry turns a cue off (no more tickboxes), and
a new note covers the front-most "couldn't find the sound file" warning + auto-disable. Startup
behaviour section and the Menus -> Preferences entry updated for the four-tab Preferences dialog
(General / Audio cues / Startup behaviour / Update settings) and the retired Options-menu item.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Part 1 - "Uncheck all inputs and outputs" button now also resets the ASIO driver to "(none)":
renamed to say so, and UncheckAllDevices sets asioDriverBox to row 0 for a full clean
WASAPI-only, nothing-selected state.
Part 2 - checkbox tick/untick sounds: every checkbox toggle anywhere in RemSound now plays a
short cue (check.wav on tick, uncheck.wav on untick) - instant feedback on which way a box
went, especially in the inputs/outputs lists. New CheckSoundService + two machine-wide cues
(CheckboxOn/Off) with the usual numbered-variant + Preferences treatment. Hooked from
AccessibleCheckBox.OnCheckedChanged and the device lists' WireCheckedListAccessibility, both
gated on the control being Focused so a genuine user toggle clicks but bulk programmatic
(un)checking (profile load, "uncheck all") stays silent. Reloaded at startup and on cue change.
Tests + manual updated; .sfk byproducts cleared.
Remaining for the overhaul (next): tabbed Preferences (General / Audio cues / Startup behaviour /
Update settings), the cue-list redesign with a "none" option replacing per-cue checkboxes, moving
Startup behaviour out of the Options menu, and a front-most "missing sound file" error.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Six new machine-wide cues, each with the same numbered-variant + Preferences treatment as
the others (enable tickbox, Choose default sound picker, Play/Browse):
- Send turned on / off, Receive turned on / off: fire from OnStreamingCheckboxChanged, so
they sound whether the user clicked the in-window tickbox or pressed the mute shortcut
(the hotkey flips .Checked, which routes through the same handler). Suppressed during
profile load by the existing password-gate guard, so loading a profile doesn't blast them.
- Minimise (hide) / Restore (show): fire from the tray controller's Minimize()/Restore() on a
genuine visibility transition (guarded against no-op / startup-minimise).
Enable flags + custom-WAV overrides for these six live machine-wide in AppConfig
(EnableSendOnCue.., MachineCueCustomPaths) - they're app-level feedback, not per-profile
audio - so no Profile/settings-cache plumbing. TryLoadCueSound now also honours the
machine-wide custom path. PreferencesDialog gains a MachineRow helper + the six rows.
Sounds: shipped via the existing sounds\*.wav wildcard. Fixed an obvious typo in the
supplied files ("rcieve off 1.wav" -> "recieve off 1.wav") so receive-off has both variants.
Renamed the old single-name cue WAVs to Ed's numbered-variant set; added key/passkey and the
new cue sounds.
build-release.ps1: new step deletes the SoundForge .sfk peak-file byproducts from sounds\
before packaging (they never shipped - build is *.wav only - this just keeps the tree tidy).
Tests + manual updated for the six new cues.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Cue sounds now ship as numbered variants ("connect 1.wav", "connect 2.wav", ...); the
count is never hard-coded so more can be added with no code change.
- CueSounds.cs: discovers a cue's "<base> <n>.wav" variants (case-insensitive) and
resolves the active default: per-profile custom WAV > machine-wide chosen variant >
first variant > silent. Wired into MainForm.TryLoadCueSound, the startup cue in
Program.cs, and PreferencesDialog.ResolveCueFilePath.
- AppConfig: DefaultCueSounds (machine-wide cueId -> chosen filename) and
EnableKeyboardClicks (on by default).
- Preferences: a "Choose default sound" listbox under the cue checklist - it lists the
selected cue's variants, arrowing it previews each sound and makes it that cue's
default. Plus a "Play keyboard clicks when typing into any edit field" checkbox.
- KeyClickService.cs: an app-wide WM_CHAR message filter + a low-latency NAudio mixer.
Typing into any edit field plays a random key click (key 1..N.wav); password fields
also play passkey.wav at the same instant. On/off live from the Preferences toggle.
Inert if the sounds are missing or the device won't open; never consumes the keystroke.
- csproj: ship every sounds\*.wav via a wildcard (variants, key clicks, passkey, future
additions) instead of stale per-file canonical names.
- Tests: resource checks (self-test + run-tests.ps1) now verify each cue has >=1 variant
and that key 1.wav / passkey.wav are present. Accessibility audit still green with the
new Preferences controls (Alt+D, Alt+K - no mnemonic clashes).
- Manual: variant picker, keyboard clicks, and the new sound-file naming documented.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Andre's three "bigger ideas" from RemSound-smoke-test-agent-brief.md:
- Richer diagnostics: --diagnostics now includes a live localhost audio self-check
(PCM + Opus, with packet/underrun/drop/buffer/latency counters), the most recent
session snapshot parsed from the log (codec, send/receive state, buffer, drops,
heartbeat), and a recent-warnings/errors digest from the log. BuildDiagnosticsReport
gained a runLiveAudioProbe flag so the self-test's privacy check stays fast.
- Headless accessibility audit: new --selftest step constructs the dialogs that can be
built without hardware (Startup behaviour, Recording settings, Preferences) and checks
every actionable control announces a name and that Alt-key mnemonics are unique within
a container. MainForm is out of scope (its constructor opens audio/hotkeys/sockets).
Dialogs that won't construct are skipped, not failed. Currently audits 3, no violations.
- Perf/leak sanity: new --perftest command runs several audio-loopback cycles and reports
whether handle/memory/thread counts stay bounded (handles ratcheting up cycle-on-cycle is
the leak fingerprint, given RemSound's handle-leak history). Lenient thresholds; logs the
numbers for build-to-build comparison. Wired into run-tests.ps1.
- Shared AudioLoopback helper (used by the self-test, diagnostics and perf test) so all
three exercise the identical real capture/encode/network/decode path on test port 47929.
- csproj: the four previously-unconditional cue Content items are now Exists-guarded like
the rest, so a mid-edit sounds\ folder doesn't break the dev build; the gate still
enforces the required cues before release.
Help + manual updated (--perftest, --smoke-test, --config-dir, richer --selftest).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Adopted from Andre's RemSound-smoke-test-agent-brief.md - the gaps our pack didn't
already cover:
- --config-dir <folder>: redirect ALL user state (config, profiles, logs, cue
sounds) to an explicit folder for this process only, applied at the very start of
Program.Main before the layout migration runs. Lets a test exercise a real build
without touching the user's live settings (the brief's safety rule 1). Works with
every command. AppConfig gains SetUserDataDirectoryOverride / an override on
UserDataDirectory; CommandLine.TryGetConfigDir parses it early.
- --smoke-test / --smoketest: alias for --selftest, matching the brief's vocabulary.
- run-tests.ps1: a cold-start + clean-close smoke (brief baseline steps 3-4) -
launches the GUI minimized against an isolated --config-dir, confirms it stays up,
that it used the isolated folder (real settings untouched), and that --close shuts
it down with no orphan process. SKIPs cleanly if a RemSound instance is already
running (machine-wide single-instance lock).
Manual + --help updated for both switches.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The test suite, modelled on Andre's Sensor Readout (an in-app self-test + a build
script), runnable as one step before every publish.
Part 1 - in-app multi-step self-test (SelfTest.cs), run by --selftest:
audio round-trip (PCM + Opus over localhost, dedicated test port so it never
clashes with a running instance), encryption right/wrong-password + fingerprint,
packet framing + malformed rejection, client<->server wire-format compatibility,
settings save/reload, profile save/reload (temp folder), diagnostics-report
privacy (never leaks a password), and bundled-resources present. Each step is
timed and reported PASS/FAIL/SKIP; exit 0 only if nothing failed. Replaces the
old single-shot --selftest. RunDiagnostics refactored to expose
BuildDiagnosticsReport(AppConfig) for the privacy step.
Part 2 - run-tests.ps1: builds, then checks the package (sounds, readme, native
opus, framework-dependent, dll version == csproj), the About-box changelog, the
client/server wire contract (relay magic/version/port still match RemPacket),
the CLI surface, and runs --selftest. build-release.ps1 now runs this gate first
and aborts the release if it fails.
Bug caught + fixed: the published release zip carried ZERO cue sounds (startup
sound + connect/disconnect/etc.) - MSBuild's incremental Content-copy marker
skipped sounds\ on a fresh publish. Added an AfterTargets=Publish copy in the
csproj that lands every cue WAV in the published sounds\ folder regardless of
the marker. Verified: a staging publish now contains all 9 cue WAVs.
Manual/help: --selftest description updated (readme.html + MANUAL.md).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Receiver: a plain (Mixed) stream now renders on an active lane when the
receiver is in two-lane (ASIO) mode, instead of being decoded into a ring
nothing reads. Fixes one-way silence ("my mic works for me but not for them").
- Receiver: drift resampler gains a buffer-depth correction term so a bloated
standing buffer eases back to the latency target over a long session.
- App: don't send audio until a peer is genuinely reachable (issue #8); status
no longer shows phantom send traffic with nobody connected.
- App: start-up cue sound (machine-wide toggle + custom path in Preferences).
- App: command-line options (CommandLine.cs) -- --devices, --selftest,
--diagnostics, --log, --close, --profile, --connect, --minimized, --version,
--help. New "Command-line options" manual section (readme.html + MANUAL.md).
- Version 3.9; About-dialog and RELEASE_NOTES updated.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
New profile: a File-menu item + Ctrl+N that loads a fresh blank template as a
new unsaved session via a LoadBlankTemplateNext handoff to Program.cs's relaunch
loop — reachable even when "start with a specific profile" boots past the picker
(issue #6). Offers to save the current profile first if dirty; deliberately
silent (no profile-switch cue).
Renamed the user-facing "blank template" to "New profile": the picker's synthetic
entry (now a distinct marker TYPE, collision-safe against a real profile named
"New profile"), the window title ("RemSound — New profile"), and the manual.
Fixed the password-mismatch warning flashing away: it's raised from the 1 Hz
statusTimer, which kept firing into the modal loop and rebuilt the peer lists
(SyncAllPeerLists) under the dialog, knocking it out of the foreground. Now the
tick is frozen while it's up, it's routed through ForegroundDialog, and a
re-entry guard ensures one warning that stays put. Audited: it was the only
popup raised from a recurring timer.
Docs: manual section "Connecting to one specific IP address (and only that one)"
explaining by-name vs by-fixed-IP and that a profile saves the exact address
(issue #7 — functionality already existed); About box + RELEASE_NOTES for v3.8;
MANUAL.md regenerated.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Coalesce capture-engine rebuilds (CompositeCaptureBackend): a swap-triggering
source change now arms a 250ms debounce timer and re-arms on each further
change, so a flap or quick reconfiguration produces ONE rebuild to the final
state instead of a burst (Andre's 16:40 four-rebuilds-in-33s crackle). In-place
updates still apply immediately; a pending rebuild whose target flaps back is
cancelled.
Auto-tune (TickRoute) now keys off the SECOND-highest arrival-gap/render-gap
second in the lookback window instead of the single worst, so a lone ~1s
OS/driver stall no longer balloons the buffer to the 200ms cap (the 16:51
trim burst); sustained jitter still reacts at full speed. Logs both gap-max
(true peak) and gap-used (value acted on).
Mic-privacy detector widened: also catches a per-app Deny aimed at this exe
under ConsentStore\microphone\NonPackaged\<exe>, the HKLM NonPackaged gate,
and the Group-Policy/MDM force-deny (AppPrivacy LetAppsAccessMicrophone=2) —
the block shapes that silence WASAPI capture while ASIO sails past, and that
the old three-value check missed.
Forensic instrumentation so the next log proves what happened: capPeak=
(loudest pre-encode sample, per lane, on the diag line), mic-privacy verdict
logged at startup, ui: capture tick/untick events, and device-event: lines for
Windows endpoint changes.
Docs: mic-privacy + auto-tune sections updated in readme.html, MANUAL.md
regenerated, About-box changelog and RELEASE_NOTES for v3.7.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Replace the generated cmd.exe + robocopy update helper — which silently
failed on some machines — with an in-app C# installer:
* Stage the new version to a per-user temp folder off the install and run
the new RemSound.exe from there, so nothing in the install is locked by
the updater itself.
* Wait for the old process to fully exit (real WaitForExit), then
back-up-and-swap files in C# with retry + rename-aside; roll the install
back to the previous version on any failure, so a failed update can never
leave a half-installed RemSound.
* Log every step to updater.log; clean up old stages and legacy batch
artefacts on launch. Removed the old BuildInstallScript batch generator.
Route the "RemSound is already running" dialog and its follow-up message
through ForegroundDialog so they surface in front from a background-relaunched
copy, matching the earlier post-update fix.
Docs: rewrite the readme update sections for the new mechanism, regenerate
MANUAL.md, refresh the About-box changelog and RELEASE_NOTES.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Recover an unplugged/replugged output sound card automatically (issue #5):
detect the dead WASAPI device and remember the receive-output selection so it
re-ticks and re-opens when the card returns.
- Adaptive per-card WASAPI buffer target sized to each card's pull chunk, held
stable so it never flits about under CPU/network load.
- Consolidate all per-user data (config, profiles, logs, sounds) into one
"user settings and logs" folder; migrate every older layout; exclude it from
the updater so custom cue sounds now survive updates.
- Mic-privacy detector: warn once when a Windows-blocked mic is switched on, or a
profile loads with one already on.
- All warning/notice dialogs now come to the foreground even when minimised.
- Apply volume + mute on profile load (were saved but not restored).
- Crash-safe (atomic) profile/config saves.
- Fix two resource leaks (push-mode capture MMDevice; UPnP DeviceFound handler).
- Remove dead code (baseline-diff machinery, dead ASIO probes, no-op stubs).
- Docs: readme.html, MANUAL.md, About-box changelog and release notes for v3.5.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Builds on the v3.4 freeze (dd70613) with the fixes and tuning from live testing,
plus the v3.4 documentation pass.
Audio (receiver):
- Per-device WASAPI drift correction in MultiOutputPlayout. A pull-side resampler
(mirroring SessionPlayout's proven corrector) holds each output device's buffer at
a fixed low depth, cancelling the slow clock drift that made WASAPI peers "lag
apart" over long sessions. Feed-forward clock-ratio measurement plus a gentle
depth-restoring term; the first measurement window is discarded because WASAPI
start-up priming poisons it. ASIO already self-corrected; this brings WASAPI level.
- Output device buffer requested at 5 ms (WASAPI clamps it up to the device's minimum
period, ~10 ms) instead of 15 ms, since the corrector keeps it fed — a free saving.
UI / accessibility (MainForm, Program):
- Startup notices (what's-new About box, Realtek warning) now run one at a time via a
single sequence instead of separate BeginInvokes, so they no longer stack into
nested modals that couldn't be closed. The loading splash is skipped for a
tray-bound quick switch.
- Quick profile switch keeps RemSound in the tray if it was there, and plays the
switch cue immediately on click.
- Profile-switch cue now plays on click for every switch path (recent menu, quick
switch, File > Open) and no longer on a fresh start into the first profile. It was
also previously dead on the rebuilt form (pendingProfile was nulled first).
- Realtek ASIO toggle's accessible name now reads "Enable"/"Disable" to match the
visible text, instead of "Toggle" (screen reader read the wrong word).
Docs (plain English):
- RELEASE_NOTES.md: v3.4 entry.
- About dialog: v3.4 "what's new".
- readme.html (the canonical bundled manual): quick switch, the hotkey read-outs, the
new profile-menu-open cue, Realtek auto-detect/disable, and the config-folder path.
- MANUAL.md regenerated from readme.html via sync-manual.py so the two stay in sync.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Headline: all audio is now encrypted (AES-256-GCM), keyed by a per-profile
password. Mandatory — v3.3 only interoperates with v3.3+.
Encryption
- RemSoundCrypto (Core): PBKDF2 key derivation, AES-GCM encrypt/decrypt
(low-alloc, into-span), password fingerprint, light on-disk obfuscation.
- Wire: SenderLane encrypts the audio payload (PCM split across parts when the
+28 overhead crosses MTU); AudioReceiver/StreamSession decrypt via a shared
single-thread AudioDecryptor. Fingerprint piggybacks on the Format packet
(offset 36, backward-compatible) so a peer can detect a password mismatch.
- Profile.Password (scrambled), carried through BuildCurrentProfile; MainForm
derives + pushes the key/fingerprint to sender + receiver (RecomputeAudioCrypto).
- UX: ask-for-password on profile create; File -> Change this profile's password
(ProfilePasswordDialog); Options -> Profile passwords (manager); a gate that
prompts before streaming without a password; and a clear "passwords don't
match" / "peer needs to update" message driven by the fingerprint.
Cue fixes
- CuePlayer (NAudio) replaces System.Media.SoundPlayer, which silently failed
on the 96 kHz/24-bit cue WAVs (and any custom file) — cues now play reliably,
resampled to 48 kHz/16-bit. Also fixes the Preferences preview button.
- Connect/disconnect cues now audio-gated with hysteresis: connected when audio
flows OR heartbeat healthy; lost only when audio stops AND heartbeat
unreachable. Kills false disconnects and the receive-only "no cues" case.
- Honest cue logging (played / muted / not loaded).
Smaller
- Endpoint stickiness: keep the audio target pinned to the heartbeat-proven
address instead of chasing a multi-homed peer's other (unreachable) address.
- "Online/offline" label now audio+heartbeat aware, not discovery-only.
- "Show what's new after each update" preference (on by default).
Docs: About v3.3 block, RELEASE_NOTES, README (encryption as a headline),
manual section 12 "Passwords and encryption" (+ renumber), MANUAL.md regenerated.
Version 3.2.0 -> 3.3.0.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- New "Update sound" cue (CueId.Update / update.wav). Plays just before an
update starts installing, on every path (manual, background-silent,
startup-silent), so a silent background update gives an audible heads-up
before RemSound closes to restart. Per-profile mute + custom-sound override
in Preferences, same infrastructure as the other cues:
* Profile.EnableUpdateCue + RemSoundSettingsStore Load/Save + round-trip
* MainForm updateSound field, TryLoadCueSound, play in InstallUpdateAsync
gated by LoadEnableUpdateCue
* PreferencesDialog "Update sound" CueRow + ResolveCueFilePath mapping
* update.wav shipped in sounds\ via csproj Content
- Single-instance "switch to the running copy" now actually brings the window
to the front. The second copy grants the running copy foreground rights via
AllowSetForegroundWindow before signalling, and lingers briefly so it can
raise itself before we exit — without this, Windows' foreground lock left
the running window only flashing in the taskbar (Ed's report).
- Docs: About box v3.2 block, RELEASE_NOTES.md, manual cue section (now seven
cues, with the update cue described), MANUAL.md regenerated.
- Version bumped 3.1.3 -> 3.2.0.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Fixes the chained-fault runaway Andre hit after an update (multiple copies
stacking, audio climbing to deafening, terminal kill to recover).
- Single-instance lock (SingleInstanceCoordinator + SingleInstanceDialog,
wired in Program.Main). A named mutex makes two copies impossible. A second
launch offers: switch to the running copy (default; surfaces it from the
tray via a named activation event), or force the running copy closed and
start fresh (Process.Kill, retried elevated if the target is elevated).
This is the structural fix that makes the stacking runaway impossible.
- Prompt-free update exit. InstallUpdateAsync sets updatingInProgress before
Application.Exit(); the close path's skipPrompt now honours it, so no
unsaved-changes dialog (whose default button is Cancel) can abort the
update's restart.
- Read-only persistence fix. BuildCurrentProfile now carries
currentProfileReadOnly into the saved snapshot. Previously a deliberate
save of a locked profile wrote ReadOnly=false, silently unlocking it on
disk — which re-armed the save prompt that then blocked the update.
- In-process double-install guard. updateInstallStarted stops the ~4 s
startup check and the background poll both staging an install + helper.
- Docs: About box, RELEASE_NOTES.md, readme.html + MANUAL.md ("Only one copy
of RemSound runs at a time").
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Tray icon now re-registers itself (hide+re-show) whenever the meaningful
state changes — peer connect/drop, send/receive toggle, recording
start/stop — so the name a screen reader announces stays in step with
the live state. Fixes the persistent "no peers" then "1 peer" double
announcement that the old "show window then minimise again" trick used
to clear by hand. Same root cause as the v3.1.1 stuck-tooltip fix, just
exposed when the state changes a moment after the icon appears.
- Recording shows as a plain "recording" flag in the tray rather than a
live timer. A ticking timer would have either flickered the icon once a
second or left a screen reader announcing a stale time next to the live
one. Removed the now-dead FormatRecordingElapsed helper.
- Bundles the earlier Win7 updater fix (6cbde0d): a failed secure
connection is no longer mislabelled as "you're up to date".
- About box, RELEASE_NOTES.md, readme.html and MANUAL.md updated to match.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two new cues join the existing connect / disconnect / record-start /
record-stop set:
* profile-save cue (sounds\save.wav by default) fires in
SaveProfileTo after a successful Save or Save As. Honours the
Profile.EnableSaveCue per-profile flag.
* profile-switch cue (sounds\profile.wav by default) fires in the
MainForm Shown handler after a profile finishes loading - covers
both startup-with-profile and mid-session profile switches.
Honours the Profile.EnableProfileSwitchCue flag. Because cue
loading runs AFTER settings.ApplyProfile in the ctor (line 542),
the profile being entered determines which sound plays - not the
one being left, exactly as Ed asked.
The audio cue UI in PreferencesDialog stays as a CheckedListBox (up /
down navigates, Space toggles) with TWO action buttons below that
operate on whichever cue is selected:
* Play [cue name] (Alt+P) - previews via SoundPlayer.Play on the
resolved path (custom override if set, default in sounds\
otherwise). Independent of the tick state.
* Browse for [cue name]... (Alt+B) - opens a WAV picker. If the
user picks a file inside RemSound's own sounds\ folder, it's
treated as "use default" and the override is cleared - avoids
pinning the user to a specific shipped default that a future
release might replace. Right-click "Use default sound" reverts.
Custom cue paths AND enable flags are per-profile. Lives on
Profile.CustomCuePaths (Dictionary<string,string>) and the per-cue
EnableXxxCue bool? properties. Cache mirror in
RemSoundSettingsStore.Settings.
All default WAVs moved from the install-root flat layout into a
sounds\ subfolder (csproj Content rules updated). save.wav and
profile.wav are bundled defaults.
Tray menu rewritten (MainFormTrayController) per Ed's spec:
* Show RemSound (W) - now uses Win32 SetForegroundWindow after the
standard Activate() because WinForms Activate is blocked by the
foreground-lock when invoked from a tray-menu click, which left
screen-reader users having to Alt+Tab to reach the restored
window.
* Enable sending (S) / Enable receiving (R) - tickable, reflect
current state, TOGGLE rather than always-on.
* Profiles (P) - submenu populated from AppConfig.RecentProfiles
with the same &1..&5 mnemonics the File menu uses. Pre-populated
once at construction so WinForms recognises it as a submenu and
fires DropDownOpening - originally I relied entirely on the
open event, which the framework skipped for items with no
DropDownItems, producing the "Profiles does nothing" bug.
* Exit (X).
Tray tooltip now built dynamically from snapshot tick (1 Hz):
"RemSound - [recording for MM:SS,] N peer(s), sending (lane),
receiving (lane)". Recording timer only included while
RecordingController.IsRecording is true (added
RecordingStartedUtc accessor for the elapsed calculation). Lane is
derived from which device-list ticks are active, not just the audio-
mode setting, so a BothIndependent user with only WASAPI inputs ticked
honestly reads as "sending (WASAPI)".
Fixes:
* Initial tooltip "RemSound" produced a "RemSound RemSound" read on
NVDA because the process name and tooltip matched. Set to
"RemSound - starting up" so the duplicate disappears.
* Recent profile menu items no longer carry a "Recent profile N:"
AccessibleName prefix in either the tray submenu or the File
menu's Recent profiles - now just the profile name. Number-key
mnemonics (&1..&5) untouched.
Manual (readme.html) updated: new section 17 "Audio cue sounds"
documents all six cues, the Play/Browse buttons, the right-click
"Use default sound", and the per-profile semantics. Sections 17-21
renumbered to 18-22. New "System tray icon and its menu" subsection
inside section 4 documents the redesigned right-click menu and the
hover tooltip. MANUAL.md regenerated via sync-manual.py. About box
gets a v3.1 block at the top. RELEASE_NOTES.md fully rewritten for
v3.1.
No wire format change - v3.1 talks to other v3.0.x machines exactly
as before.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
People landing on the repo page were having to install RemSound just to read what
it does and how to use it. Two doc changes fix that:
1) README.md rewritten as a plain-English landing page. Drops the developer-focused
highlights / build-from-source / project-layout sections in favour of what
RemSound is, who it's for, how to install it, and a prominent link to the manual.
No jargon, no command lines, no NuGet / SDK / ASIO-protocol talk. The dev-side
information that used to live here (build commands, source layout, relay setup)
is still discoverable for anyone who wants it — the source itself is on the same
page, and the relay docs are under server/README.md.
2) MANUAL.md added at the repo root as the GitHub-rendered version of the F1 help.
Markdown derived directly from readme.html via sync-manual.py (new), so visitors
can read the manual inline on the repo page with no download. readme.html stays
exactly where it was (bundled inside RemSound, opened by F1) — it remains the
canonical source of the manual content; MANUAL.md is auto-generated from it.
The sync-manual.py script is invoked automatically from build-release.ps1 as step 0,
before any other release work. It regenerates MANUAL.md from readme.html and then
checks `git diff` on MANUAL.md — if the file changed, the release is paused with a
message asking the user to commit the updated MANUAL.md alongside the release commit.
That makes it structurally impossible to ship a release with a stale GitHub-facing
manual: forgetting to commit MANUAL.md after editing the bundled help triggers a
deliberate release-time stop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
EdnunpandClaude Opus 4.8