Cue sounds now ship as numbered variants ("connect 1.wav", "connect 2.wav", ...); the
count is never hard-coded so more can be added with no code change.
- CueSounds.cs: discovers a cue's "<base> <n>.wav" variants (case-insensitive) and
resolves the active default: per-profile custom WAV > machine-wide chosen variant >
first variant > silent. Wired into MainForm.TryLoadCueSound, the startup cue in
Program.cs, and PreferencesDialog.ResolveCueFilePath.
- AppConfig: DefaultCueSounds (machine-wide cueId -> chosen filename) and
EnableKeyboardClicks (on by default).
- Preferences: a "Choose default sound" listbox under the cue checklist - it lists the
selected cue's variants, arrowing it previews each sound and makes it that cue's
default. Plus a "Play keyboard clicks when typing into any edit field" checkbox.
- KeyClickService.cs: an app-wide WM_CHAR message filter + a low-latency NAudio mixer.
Typing into any edit field plays a random key click (key 1..N.wav); password fields
also play passkey.wav at the same instant. On/off live from the Preferences toggle.
Inert if the sounds are missing or the device won't open; never consumes the keystroke.
- csproj: ship every sounds\*.wav via a wildcard (variants, key clicks, passkey, future
additions) instead of stale per-file canonical names.
- Tests: resource checks (self-test + run-tests.ps1) now verify each cue has >=1 variant
and that key 1.wav / passkey.wav are present. Accessibility audit still green with the
new Preferences controls (Alt+D, Alt+K - no mnemonic clashes).
- Manual: variant picker, keyboard clicks, and the new sound-file naming documented.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Adopted from Andre's RemSound-smoke-test-agent-brief.md - the gaps our pack didn't
already cover:
- --config-dir <folder>: redirect ALL user state (config, profiles, logs, cue
sounds) to an explicit folder for this process only, applied at the very start of
Program.Main before the layout migration runs. Lets a test exercise a real build
without touching the user's live settings (the brief's safety rule 1). Works with
every command. AppConfig gains SetUserDataDirectoryOverride / an override on
UserDataDirectory; CommandLine.TryGetConfigDir parses it early.
- --smoke-test / --smoketest: alias for --selftest, matching the brief's vocabulary.
- run-tests.ps1: a cold-start + clean-close smoke (brief baseline steps 3-4) -
launches the GUI minimized against an isolated --config-dir, confirms it stays up,
that it used the isolated folder (real settings untouched), and that --close shuts
it down with no orphan process. SKIPs cleanly if a RemSound instance is already
running (machine-wide single-instance lock).
Manual + --help updated for both switches.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Receiver: a Mixed (plain) session is rendered on an active lane in BothIndependent mode instead of being skipped, so a WASAPI-only sender is no longer silent to a receiver that has an ASIO driver selected. Also port the per-session buffer depth-drain (stops the receive jitter buffer bloating).
Sender: add sndAudFr meter (audio frames actually sent) to localise capture vs send.
App: startup sound cue (machine-wide, Preferences); stop sending audio when no peer is reachable (issue #8). Version 3.9.1.
Server (relay): fix updater version-compare for multi-dot tags, guard the main loop against crashes, reject spoofed BYE from a mismatched endpoint.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Recover an unplugged/replugged output sound card automatically (issue #5):
detect the dead WASAPI device and remember the receive-output selection so it
re-ticks and re-opens when the card returns.
- Adaptive per-card WASAPI buffer target sized to each card's pull chunk, held
stable so it never flits about under CPU/network load.
- Consolidate all per-user data (config, profiles, logs, sounds) into one
"user settings and logs" folder; migrate every older layout; exclude it from
the updater so custom cue sounds now survive updates.
- Mic-privacy detector: warn once when a Windows-blocked mic is switched on, or a
profile loads with one already on.
- All warning/notice dialogs now come to the foreground even when minimised.
- Apply volume + mute on profile load (were saved but not restored).
- Crash-safe (atomic) profile/config saves.
- Fix two resource leaks (push-mode capture MMDevice; UPnP DeviceFound handler).
- Remove dead code (baseline-diff machinery, dead ASIO probes, no-op stubs).
- Docs: readme.html, MANUAL.md, About-box changelog and release notes for v3.5.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Freezes the v3.4 feature set (everything since the v3.3 public release):
- Fix the receiver handle leak: the 3-second device-refresh timer reopened the
configured ASIO driver every tick, and Realtek's ASIO driver leaks Event+Mutant
handles on every open. Cache the ASIO probe per driver so it is opened once.
- Realtek ASIO block: detect a Realtek ASIO driver, offer once to disable it, and
never touch it again if disabled; Options-menu toggle to reverse. Global config.
- Device hot-plug is event-driven (AudioDeviceChangeNotifier) instead of a 3s poll;
debounced refresh, falls back to polling if registration fails.
- Quick profile switch: new global hotkey opens an NVDA-friendly popup of all
profiles (current marked); Enter/click switches; plays a new "profile menu open"
cue with Preferences mute + custom-sound.
- Announce assigned global hotkeys on the controls/menu items they drive (NVDA reads
"press X anywhere"). File > Open already had Ctrl+O.
- Held-back changes folded in: config-folder migration, codec-column fix, Tailscale
endpoint network-prune, empty-password guard, and the handle-leak diagnostics
(ProcessSelfMeter, HandleTypeProbe).
Version bumped to 3.4.0.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Headline: all audio is now encrypted (AES-256-GCM), keyed by a per-profile
password. Mandatory — v3.3 only interoperates with v3.3+.
Encryption
- RemSoundCrypto (Core): PBKDF2 key derivation, AES-GCM encrypt/decrypt
(low-alloc, into-span), password fingerprint, light on-disk obfuscation.
- Wire: SenderLane encrypts the audio payload (PCM split across parts when the
+28 overhead crosses MTU); AudioReceiver/StreamSession decrypt via a shared
single-thread AudioDecryptor. Fingerprint piggybacks on the Format packet
(offset 36, backward-compatible) so a peer can detect a password mismatch.
- Profile.Password (scrambled), carried through BuildCurrentProfile; MainForm
derives + pushes the key/fingerprint to sender + receiver (RecomputeAudioCrypto).
- UX: ask-for-password on profile create; File -> Change this profile's password
(ProfilePasswordDialog); Options -> Profile passwords (manager); a gate that
prompts before streaming without a password; and a clear "passwords don't
match" / "peer needs to update" message driven by the fingerprint.
Cue fixes
- CuePlayer (NAudio) replaces System.Media.SoundPlayer, which silently failed
on the 96 kHz/24-bit cue WAVs (and any custom file) — cues now play reliably,
resampled to 48 kHz/16-bit. Also fixes the Preferences preview button.
- Connect/disconnect cues now audio-gated with hysteresis: connected when audio
flows OR heartbeat healthy; lost only when audio stops AND heartbeat
unreachable. Kills false disconnects and the receive-only "no cues" case.
- Honest cue logging (played / muted / not loaded).
Smaller
- Endpoint stickiness: keep the audio target pinned to the heartbeat-proven
address instead of chasing a multi-homed peer's other (unreachable) address.
- "Online/offline" label now audio+heartbeat aware, not discovery-only.
- "Show what's new after each update" preference (on by default).
Docs: About v3.3 block, RELEASE_NOTES, README (encryption as a headline),
manual section 12 "Passwords and encryption" (+ renumber), MANUAL.md regenerated.
Version 3.2.0 -> 3.3.0.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* New "Opus, live latency" codec mode: 2.5 ms frames (120 samples/ch at 48 kHz)
via the float-input encode path. End-to-end codec delay drops to ~5 ms (vs
~12.5 ms at standard 10 ms Opus). Test on LAN: 400 pps/lane, zero missed /
reordered / duplicate packets, ~15 ms one-way saved end-to-end.
* Wire-format change: AudioFormatInfo.FrameDurationMilliseconds renamed to
FrameSamplesPerChannel (int sample-count at announced sample rate). Removes
the lossy 48000*ms/1000 conversion that couldn't represent 2.5 ms. v3 <-> v3
exact; v3 <-> v2 still passes audio (Opus decoder is self-describing from
packet TOC) but v2 side over-sizes its buffer wildly. v2.x profiles auto-
migrate via <120 sentinel rule in RemSoundSettingsStore (anything below 120
is treated as legacy ms and multiplied by 48). Profile JSON key kept as
OpusFrameMilliseconds via [JsonPropertyName] so old profile files still load.
* Codec dropdown rebuilt with use-case names: "PCM 48K 24 bit - uncompressed",
"Opus, broadcast quality - loss tolerant", "Opus, live latency - for jamming
and monitoring". Middle 10 ms option retired; saved 480-sample profiles
collapse to broadcast quality (safer-side default).
* Profile auto-resume after self-update: RemSoundUpdater writes a one-shot
_resume-after-update.txt sentinel containing the active profile title before
exit; Program.Main reads + deletes it on next start and silently loads that
profile, skipping the picker. Helper batch's robocopy /XF excludes the
sentinel and the failure-branch cleans it up if the install aborts. Falls
through to normal startup behaviour (StartWithProfileTitle or picker) if the
sentinel is missing, empty, or names a profile that no longer exists.
* Read-only profile saves now go through on explicit Ctrl+S / File -> Save
with a one-time TaskDialog warning ("Save anyway" / "Cancel" + Do-not-show-
again). Lock continues to suppress the automatic unsaved-changes prompt on
close / profile switch (its main job). AppConfig.SaveOnReadOnlyMessageSuppressed
renamed to SaveOnReadOnlyWarningSuppressed; v2.x suppression flag is silently
discarded since the behaviour changed and the user needs to see the warning
once on each machine.
* Manual (readme.html) updated: codec table rewritten with the three new
choices and corrected bandwidth figures, send-rate description updated, new
sections "The same profile picks up automatically after an update" and
"Saving on purpose while a profile is locked".
* Subsumes the never-separately-released v2.2 work: native Opus encoder
(~97% less per-second memory churn on Opus send path via Concentus.Native),
efficiency tidy-ups (item 4 ASIO probe rate, item 6 WaitHandle, item 7
snapshot cache, items 14/16 heartbeat + discovery), legacy cleanup
(items 30/34/35/36: KeepAlive infrastructure, drift drop/repeat/accumulator
fields, fan-out cache stat). New diagnostic columns cpu/memMB/wsMB/
allocKBps/captureMs/sendMs/recvMs/renderMs gated on Enable-logs.
About dialog updated with v3.0 block at top; v2.2 block retained for the
subsumed work.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Headline features:
* Automatic router port opening (UPnP / NAT-PMP / PCP). Opt-in via
Preferences; surfaces external address + carrier-grade NAT detection.
* Lock profile (read-only). New File-menu tick that makes a profile
load-only — session changes don't persist, no save prompt on close.
Unblocks unattended shutdowns (NVDA gone, remote dropped, hibernate)
where the existing save prompt could deadlock.
* Check for updates on startup (default on) + brief countdown notice
before silent updates install, so a launch-time update doesn't make
the app silently vanish.
* "Cue sounds" -> "Audio cue sounds" label clarification.
Bug fixes:
* No sound after the computer wakes from sleep. PowerResumeHandler
rebuilds the audio backend automatically on resume; brief
"Reconnecting to audio driver" splash during the rebuild.
* Receiver audio silent after waking from hibernate. RefreshAudioDeviceLists
now treats a transient ASIO probe failure (returns -1/-1 because the
driver is mid-teardown / mid-reinit) as "retry next tick" instead of
clearing the user's tick selection.
Diagnostic-only changes (gated on the existing Enable-logs checkbox,
zero cost when off):
* AudioStepProbe split into cross-buffer vs within-buffer maxes so log
inspection can tell a real-content sharp transient apart from a
pipeline-boundary glitch. Plumbed through every probe owner.
* New rxNetGapMs + gc0/gc1/gc2 delta columns in the diag log to split
receive-side jitter into network-layer vs managed-runtime causes.
Files touched: RELEASE_NOTES.md + readme.html + 24 source files across
RemSound.Core / RemSound.Sender / RemSound.Receiver / RemSound.App.
Three new app files: PowerResumeHandler, RouterPortMapper,
UpdateInstallNoticeDialog.
Wire format and audio pipeline unchanged from v1.5 onward — v1.5
through v2.1 peers interoperate.
Bug fixes:
* BothIndependent recording was double-tapped — when both WASAPI and
ASIO outputs were ticked, recordings came out garbled and ~2x the
expected duration. AudioRecorder now uses four per-lane rings
(sent-wasapi, sent-asio, recv-wasapi, recv-asio) plus a writer-
thread mix step that drains min(wasapi, asio) frames and sum-mixes
with the soft-tanh limiter. Tap signatures gained a RenderRoute
parameter; Mixed maps to the wasapi slot.
* A peer announcing on the WASAPI lane was inaudible when the
receiver only had an ASIO output ticked (and vice versa). The
session opened, samples flowed into the SessionPlayout ring, but
ReadForRoute(AsioLane) skipped any session whose Route was
WasapiLane so nothing drained the ring. PlayoutEngine now tracks
per-lane "is this lane backed by a device" via volatile bools
settable through SetLaneActive(RenderRoute, bool), called from
CompositeRenderBackend.SetOutputDevices whenever the device split
changes. ReadForRoute admits orphan sessions when the other lane
is inactive.
Menu reorganisation:
* New Options menu (Alt+O) holds Recording settings (Alt+S), Keyboard
shortcuts (Alt+K, Ctrl+K), Startup behaviour (Alt+T), Preferences
(Alt+P, Ctrl+P). Pre-v1.5 these were scattered across File menu,
Record menu, and inside the Preferences dialog itself.
* Record menu mnemonic moved from Alt+O to Alt+K, rendered as
"Record (Alt+K)" so the chord is visible despite K not being a
letter in "Record". Alt+R is taken by Receive audio.
* File menu — new Recent profiles submenu (Alt+F, R) listing the
five most-recently-opened profiles. Press 1..5 inside the submenu
to jump to a slot. Missing files are skipped from the menu but
kept in storage.
* Rename current profile moves to Alt+M (was R), Minimise to tray
moves to Alt+N (was M).
* Lock to audio clock was Alt+K, now Alt+D.
UX additions:
* Ctrl+O = Open profile (matches the menu chord).
* New global hotkey: Start / Stop recording. Pickable from Options
-> Keyboard shortcuts. Unbound by default. Works system-wide.
Wire format and audio pipeline unchanged from v1.4 — v1.4 and v1.5
peers interoperate.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
EdnunpandClaude Opus 4.8