Commit Graph
4 Commits
Author SHA1 Message Date
EdnunpandClaude Opus 4.7 45b709d49d Recording-settings dialog rework + menu mnemonic clean-up
Recording settings dialog
=========================

Promote what were row attributes inside the format-attributes table
into their own dedicated listboxes. Pre-rework each format's
attribute list contained a row per (quality knob × channel mode)
combination — doubling the row count for no real benefit. WAV had
6 rows, MP3 / OGG-Opus had 8, FLAC had 4. Channel mode is now its
own listbox; per-format attribute lists shrink to 3 (WAV), 4
(MP3 / OGG-Opus), 2 (FLAC).

FLAC compression level was previously a hidden RecordingSettings
field locked at the libFLAC default of 5. Now exposed as its own
conditional listbox with all 9 levels (0..8). Visible only when the
selected file format is FLAC; the column collapses to 0% width
otherwise so the dialog reads cleanly as 4 columns for non-FLAC
formats and 5 for FLAC.

Mnemonics:
  * Source         Alt+S    (unchanged)
  * File format    Alt+F    (unchanged)
  * Attributes     Alt+A    (unchanged)
  * Compression    Alt+L    (new, FLAC-only visible)
  * Channels       Alt+C    (new)
  * OK             Alt+O    (unchanged)
  * Cancel         Alt+N    (was Alt+C — moved to free C for Channels)

Record menu mnemonics
=====================

Item mnemonics inside the Record menu reorganised so the keystroke
inside the menu matches the same letter used for Ctrl+R outside it,
and Settings reads naturally:

  * Start recording / Stop recording   Alt+R  (was Alt+S)
  * Recording settings                 Alt+S  (was Alt+T)
  * Open recordings folder             Alt+O  (unchanged)
  * Change recordings folder           Alt+C  (unchanged)

UpdateStartStopRecordingMenuLabel keeps the underline on a literal
R in both states ("Sta&rt recording" → "Stop &recording") so the
keystroke does the same job regardless of which label is active.

No version bump — the running version stays at 1.3.0. These changes
will be bundled with the next public release alongside whatever else
is in flight.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
2026-05-15 13:40:42 +01:00
EdnunpandClaude Opus 4.7 c59e413c1f Bump to v1.2.0: recording, sound cues, drift compensation, diagnostics
New user-facing features:

* Recording. Dedicated Record menu (Alt+O — moved from Alt+R to
  avoid clashing with the Receive audio checkbox), Start/Stop on
  Ctrl+R, settings dialog, per-profile source / format / bit-depth /
  channel-mode / folder. Three source modes (received only, sent
  only, both). Files are crash-resilient — a process crash
  mid-recording leaves a playable file containing everything up to
  the last header refresh (~5 seconds).

* Four output formats, all functional:
    - WAV: 16/24-bit PCM or 32-bit float, custom writer with
      periodic RIFF re-patching.
    - MP3: LAME 128–320 kbps CBR (via NAudio.Lame).
    - OGG-Opus: 96–256 kbps VBR (via Concentus.Oggfile, reusing the
      Concentus encoder from the wire path).
    - FLAC: 16/24-bit lossless (via CUETools.Codecs.FLAKE — pure
      managed, no native DLL).

* Recording start/stop sound cues. record start.wav and
  record stop.wav play around the recording transition. Played via
  System.Media.SoundPlayer to the default Windows output, separate
  from the recording pipeline so a normal recording does not contain
  the cue.

* Per-cue Preferences. The old single "Mute connect/disconnect
  sounds" checkbox is replaced by a CheckedListBox: Connect /
  Disconnect / Recording start / Recording stop. Old profiles with
  the legacy MuteConnectionCues=true are honoured on first load via
  a migration path in the new Load* helpers.

* Receiver-side drift compensation switched from discrete
  single-frame splices to a continuous WdlResampler at a smoothed
  rate ratio. SessionPlayout.cs rewrite.

Diagnostics (only active with Enable logs ticked):

* Per-stage discontinuity probes — sender raw capture (per backend,
  PushModeWasapi + Asio both wired), sender pre-encode (now per
  lane in BothIndependent, fixing a cross-stream artefact), receiver
  post-decode, post-ring, post-resampler.

* Wire-level packet sequence tracking on each PCM stream — in-order
  / missed / reordered / duplicated counts in the diag log.

* Clipped-sample delta in the diag log.

* New AudioStepProbe in RemSound.Core with per-channel scan helper.

UI changes:

* Record menu uses Alt+O (Rec&ord). Inside the menu, item mnemonics
  unchanged (S / T / O / C).

* Auto-tune interval combo label is mode-aware: "Auto-tune latency
  interval" in classic modes, "Auto-tune interval — WASAPI and ASIO"
  in BothIndependent. The combo's Enabled state now follows EITHER
  lane's auto-tune checkbox (was only the WASAPI one — bug).

Wire format and audio pipeline unchanged from v1.1 — v1.1 and v1.2
peers interoperate.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
2026-05-15 12:40:01 +01:00
EdnunpandClaude Opus 4.7 768875cebb Add priority mode + always-on network packet priority
Priority mode (per-profile toggle, Audio profile tab, Alt+U):
- Bundled PROCESS_POWER_THROTTLING_STATE with EXECUTION_SPEED and
  IGNORE_TIMER_RESOLUTION flags (keeps CPU at full clock + 1 ms quantum
  pinned regardless of OS idle decisions)
- PowerSetRequest(EXECUTION_REQUIRED) + SetThreadExecutionState so the
  system can't decide we're idle and downclock
- timeBeginPeriod(1) for 1 ms scheduler quantum
- ProcessPriorityClass.High, ProcessMemoryPriority normal, working-set
  minimum locked via SetProcessWorkingSetSizeEx(HARDWS_MIN_ENABLE)
- Fully reversed on toggle-off and on form close
- Off by default (battery cost on laptops); explicit opt-in per profile

MMCSS thread priority on hot threads bumped from High to Critical
(network listener, mix loop, render thread) — always on.

Network packet priority (always on, no toggle):
- qWAVE flow on the outbound UDP socket at QOS_TRAFFIC_TYPE_VOICE with
  QOS_NON_ADAPTIVE_FLOW (Voice priority, DSCP 46/EF, WMM Voice on Wi-Fi)
- Silent fallback if qwave.dll missing or QoS service disabled
- Sender + receiver kernel UDP buffers bumped to 1 MB each (was
  256 KB send / 512 KB receive) for resilience against ~30 ms stalls

Bug fix: PreferencesDialog logging toggle no longer flags the profile
as dirty. Logging is a machine-local AppConfig setting; the spurious
ChangedAnyProfileSetting flag was triggering the unsaved-changes prompt
on exit after toggling logs alone.

Manual updated: new "Use CPU and Windows performance settings in high
priority mode (Alt+U)" subsection on the Audio profile tab, new
"Network packet priority (qWAVE / Voice / WMM)" subsection in the
network chapter, Alt+U row added to keyboard-shortcuts table.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
2026-05-14 11:21:58 +01:00
Ednunp 17259438c6 Initial commit: RemSound v1.0 2026-05-13 15:15:27 +01:00