Local checkpoint - NOT for public release.
Fan-out (every received stream to every selected output, no added latency):
- SessionPlayout mirror replicas fed the same decoded bytes; delicate ReadFloats untouched.
- PlayoutEngine reconciles replicas per active output lane; per-route tuner
aggregation keeps lanes from disturbing each other. Recording dispatch gated
to the recording route only.
- PeerDspChain.Clone() gives each output lane independent biquad state.
- ReceiverSelfChecks.FanOutToBothOutputs proves both lanes get audio (self-test).
Offline-marker pile-up fix:
- ResolvePeerDisplayName strips the " (offline)" marker before reuse, so a ghost
peer no longer compounds the suffix hundreds of times in the status line.
Issue #19 (Use-Windows-default follower in the loopback send list):
- DefaultLoopbackSendFollower resolves to the current default render device's
loopback spec, re-applied when the default changes.
Per-application send engine core (issue #20) - WASAPI-only, Win10 19041+ gated:
- CaptureKind.ProcessLoopback + ProcessLoopbackId ("proc:<pid>").
- AudioAppEnumerator: snapshots apps with audio sessions, tracked by process
name, releasing every session object each pass so nothing piles up.
- ProcessLoopbackCapture: IWaveIn over the process-loopback activation API
(hand-rolled COM interop; NAudio has no binding). Fixed 48k/float/stereo.
- CaptureSource IWaveIn overload; MixingEngine opens "proc:<pid>" sources with
no MMDevice and no render keepalive. ASIO path untouched.
- Self-test enumerated real apps on hardware; support gate verified.
UI (Preferences device/app mode + app checklist), ApplySendSources app specs,
and the reconcile timer are still to come. Gate: 15/15.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Verified findings from a multi-dimension code audit, plus the two install-flow bugs:
- Fix Opus encoder use-after-free on a codec/rate change while streaming (guard swap vs encode).
- Fix "both" single-file recording dropping audio + drifting (drain both directions in lockstep).
- Fix broken clip counter, UPnP teardown on exit, auto-update-restart foreground grant, and a
malformed-Opus-format packet orphaning a playout session forever.
- Post-install relaunch now respects start-minimised; uninstall is path-aware so it won't clear a
different copy's run-at-startup.
- Perf/hygiene: cache AppConfig off UI hot paths, fold per-peer EQ+gain into one pass, deterministic
disposal (tray menu, timers, COM shortcut, Process handles, process meter), ring-buffer overflow
guard, receiver session-lock fix, remote-control allow-list moved onto the UI thread.
- Remove dead code (two IsAsioBackend, SessionPlayout.Reset, IsSameEndpoint, RemSoundUpdater
IDisposable); several stale-doc fixes.
Deferred (not in this release): drift-estimator tweak, peer-discovery pruning, uninstall retry-loop,
encryption nonce. Wire format unchanged (interops v3.3-v5.1). Version -> 5.2.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
New Options -> Install / Uninstall RemSound on this PC: a per-user self-installer
(%LOCALAPPDATA%\Programs\RemSound, no admin) with optional desktop + Start-menu
shortcuts, login auto-start (reuses StartupAutoStart), Windows Installed-apps
registration, and copy-across of profiles+config, recordings and logs. Install
state is decided by a marker file, not a folder-path guess; the post-install
relaunch hands over foreground via AllowSetForegroundWindow so the installed copy
comes to the front; uninstall uses a batch remover (no PowerShell) and confirms
with two independent tick-boxes. All new dialogs use the house accessible controls
(AccessibleCheckBox, Theme.Heading).
Also: iOS (TestFlight) companion link alongside Android in README + manual;
slimmed-down default cue WAVs; About/RELEASE_NOTES/manual updated; version -> 5.1.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Multi-track recording drift fix (Ed's question — can the separate tracks drift over an hour?):
* Root: FlushPeerTracks skipped a peer that produced no samples in a render block, so a peer that
went quiet long enough for its session to be pruned (>4 s idle) would have its track fall behind
and desync. Now every peer track is padded to a full render block each cycle (silence when the
peer produced nothing), so all peer tracks stay sample-locked to the single render clock — they
can't drift apart however long the recording runs, and all end the same length. Same padding for
the single-file bypass path. OnRecordBlockComplete now carries the block's float count.
(The peer tracks are already resampled to the render clock per peer, so this makes peer-to-peer
sync exact; your own "me" track is capture-clocked — same soundcard for capture+playback = same
clock = no drift, different interfaces can drift slightly.)
* Self-test: two new steps — "Per-peer shaping DSP" (PeerDspChain unity/master-off/volume/parametric
+ ParametricToPeaking) and "v5 settings and shaping round-trip" (AppConfig defaults, NamedPeers,
MainTabOrder, parametric PeerShaping, recording default = Both).
* Logging (gated by the logging checkbox): master shaping switch, EQ-mode change, parametric band
add/delete, peer rename/clear/delete, and the applied Appearance settings after Preferences close.
* CLI: --list-profiles and --list-named-peers (read-only), in --help.
* Version bumped to 5.0; About-box changelog, RELEASE_NOTES.md and README updated for v5.
Build clean; --selftest passes.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Ctrl and a number selects the Nth tab as it currently appears — positions are live, so they follow
the user's tab reordering and the pan/EQ tab's show/hide. Handled in ProcessCmdKey on both the main
window and the Preferences dialog; focuses the tab strip afterwards so NVDA reads the new tab (like
Ctrl+Tab). Matches Andre's readout app. Manual updated.
Build clean; --selftest passes; deployed to both test folders. Held for next release.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Adds an Appearance tab (after General) and moves the colour theme and "show volume/pan/EQ tab" into
it, per Ed. New on that tab:
* Main tab order — a list of the four main-window tabs (all shown, even when the pan/EQ tab is
hidden) with Move up / Move down buttons to reorder them. Saved to AppConfig.MainTabOrder and
applied by the new ApplyMainTabLayout (rebuilds the tab strip in order, dropping pan/EQ when off,
preserving selection). Replaces RefreshPanEqTabVisibility.
* Enable discovered / remembered peers lists on the Connectivity tab (AppConfig.ShowDiscoveredPeers
/ ShowRememberedPeers, both default on). RefreshConnectivityListVisibility hides the row's label
and its list wrapper when off. Row labels are now captured for this.
All apply when Preferences closes. Manual updated. Build clean; --selftest passes; deployed to both
test folders. Held for next release.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Root cause of the repeated failures: each list is wrapped in a FlowLayoutPanel by AddCheckedListRow,
so setting the list's own TabIndex only ordered it inside its (single-child) wrapper and did nothing
to the tab traversal — the wrappers stayed at TabIndex 0 and sorted by add-order. Now the WRAPPERS
(list.Parent) carry the TabIndex, alongside the directly-added controls, giving:
connected, details, rename, discovered, remembered, add-by-IP, lock, status.
Set authoritatively in BuildConnectivityTab; removed the ineffective Connectivity block from
SetTabOrder. Verified against a faithful WinForms mock (GetNextControl walk) before shipping.
Build clean; --selftest passes; deployed. Held for next release.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Order is now connected, details, rename, discovered, remembered, add-by-IP, lock, status — in both
SetTabOrder (authoritative) and the visual layout. Held for next release.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* Connectivity tab order: the real driver was SetTabOrder(), whose explicit TabIndex forced
Add-peer-by-IP and Status to the end while the newer Peer details / Rename / Lock controls
defaulted to 0 — so reordering the layout did nothing. SetTabOrder now lists every focusable
control in the intended order: connected, details, rename, add-by-IP, discovered, remembered,
lock, status.
* Parametric bands Left/Right gain nudge now speaks: the new gain is announced via a UIA
notification (NVDA reads it natively — not an extra speech layer), since a plain listbox item
won't announce a value change on its own. The Bands list's accessible name now also hints that
left/right adjust the gain, so it's discoverable.
Build clean; --selftest passes; deployed to both test folders. Held for next release.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* Connectivity tab order: Add peer by IP now sits right after Rename peer (before the Discovered
list), grouped with the connected-peer actions, per Ed's requested order. Dropped the second
section header (only the lock toggle was under it).
* Audio I/O labels: "Set volume for all received audio" → "Master volume for received audio" (the
code never got this rename, only the manual had). Device lists now say "audio": "...for received
audio" and "WASAPI/ASIO audio inputs/outputs to send". Labels + AccessibleNames updated together.
* Add EQ band dialog: the spin/edit boxes now select-all on focus, so a typed value REPLACES what's
there instead of being inserted next to it and reverting (typing 2.5 over 4.0 now works).
* Parametric bands list: Left/Right arrow nudge the selected band's gain by half a dB, live —
up/down still move between bands. NVDA re-reads the band's new dB.
* Recording settings: source list reordered to Both (top, now the default) / Received / Sent;
display order decoupled from the RecordingSource enum. Default RecordingSettings.Source = Both.
* Preferences: Colour theme is now first in the General tab order.
Manual updated. Build clean; --selftest passes; deployed to both test folders. Held for next release.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Turns the flat friendly-name map into a proper machine-wide book (AppConfig.NamedPeers), and adds a
management dialog. Held for next release.
* New NamedPeer record (machine name, friendly name, last address, last-seen UTC). AppConfig gains
NamedPeers; the legacy PeerFriendlyNames map is migrated into it once on load, then no longer
written. The book stays machine-wide and profile-independent (it always was — this just enriches it).
* Only deliberately-renamed peers are recorded (per Ed) so the list can't balloon. A named peer's
last address / last-seen are updated in memory each tick while connected; persisted on address
change and on app close (timestamp-only changes don't thrash the disk).
* Options → Manage named peers (Alt+O, N): lists each named peer as "friendly — machine — last seen
date, address"; Rename (Alt+R / F2 / double-click) reuses RenamePeerDialog; Delete (Alt+D / Del)
forgets the name. Edits refresh the connected/discovered lists, the volume/pan/EQ list and details
box live.
* ApplyFriendlyName now records machine name + last address alongside the name.
Manual updated (readme.html + MANUAL.md). Build clean; --selftest passes; deployed to both test folders.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add band dialog (from testing feedback):
* Tab order is now Start, End, Gain, OK, Cancel (OK was after Cancel).
* Gain box takes decimals like 1.5 (half-dB steps); parametric list shows one decimal.
* The two frequency boxes start empty — nothing prepopulated to mislead; both required on OK.
New Connectivity-tab feature (held for next release):
* Rename peer (Alt+M) opens a dialog to give a peer a friendly name, with a Clear custom name
button. Names are keyed by the peer's MACHINE NAME (stable across restarts, IP changes and
networks), stored machine-wide in AppConfig.PeerFriendlyNames, and resolved everywhere a peer
shows: both peer lists (via PeerListItem.DisplayNameProvider), the volume/pan/EQ list, the
status line and split-recording filenames. Manual-by-IP peers with no announced name fall back
to keying by address.
* Peer details (Alt+E): a read-only box for the highlighted connected peer showing name, machine
name, IP, connected-for, link health + ping, what they're sending, and whether they're
receiving our audio. "Sending: 2 devices on ASIO at 48 kHz, Opus" is derived from the live
receive streams — each stream is one device and its lane gives WASAPI vs ASIO — so NO protocol
change and no new privacy exposure. AudioReceiver.ActiveFormatsFromAddress added for this.
Manual updated (readme.html + MANUAL.md). Build clean; --selftest passes; deployed to both test
folders. Held for next release.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Reworks the per-peer shaping tab (held for next release):
* Renamed the tab to "Volume, pan and EQ for peers"; the Preferences toggle now defaults ON.
* Collapsed the two master switches (Enable EQ / Enable pan) into ONE: "Enable volume, pan and
EQ for all peers" (Alt+E). Volume now obeys it too. PeerDspChain.Build takes a single enabled
flag; Profile.EnableAllPeerShaping replaces the two bools (old ones kept for load-migration).
* Peer picker is now a CheckedListBox: ticking a peer shapes them (per-peer bypass via new
PeerShaping.Enabled, default true); the focused row is the one the controls edit. Effective
shaping = master switch AND that peer's tick. Letter-nav suppressed so keys never toggle a tick.
* Three EQ modes, renamed: "3 band simple EQ", "12 band advanced graphic EQ", and the new
"16 band parametric EQ" (PeerEqMode.Parametric16Band).
* Parametric EQ: up to 16 user bands, each a boost/cut across a start->end range (PeerShaping
.ParametricBands; ParametricToPeaking maps range -> peaking centre+Q, shared by DSP and curve).
Add band dialog (spin-or-type, numeric-only, live preview, OK/Escape); Bands list sorted
bass->treble reading "X Hz to Y Hz, plus/minus N dB"; Delete key / Delete button, multi-select.
Set peer EQ to default clears the parametric list too.
* dB now spoken as words ("plus 3 dB" / "minus 6 dB" / "flat") on the graphic sliders and the
parametric list, since NVDA users typically have punctuation off and never hear a "+".
* New unbound machine-wide global shortcut "Toggle volume, pan and EQ for all peers" (not stored
in any profile) via the hotkey controller + settings store.
* Renamed the Inputs/outputs "Set volume for all received audio" to "Master receive volume".
* Added EqCurveControl: a purely-visual EQ response graph (not focusable, invisible to NVDA).
* Full manual sweep (readme.html + regenerated MANUAL.md).
Build clean; --selftest passes. Deployed to both test folders. Held for next release.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two of Ed's test findings: the EQ mode picker still said "10 band advanced EQ" (it's 12 now);
and a single-file recording's name now carries the recorder's machine name too —
"<HH-mm-ss> RemSound recording <machine>.<ext>" — matching the split tracks. Held for release.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Ed wanted a band between 4 and 8 kHz. Advanced EQ goes from 10 to 12 bands: added 6 kHz (4-8
gap) and 3 kHz (2-4 gap) for even resolution through the presence region. PeerShaping
.AdvancedBandsDb default is now 12; MainForm.NormalizeBands grows an older 10-length array on
load so nothing breaks. (Feature unreleased, so no shipped settings to migrate.) Held for
next release.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Ed's request — an individual level fader per peer, sitting just before the pan control on the
Pan and EQ tab. New PeerShaping.Volume (0..1, default 1.0 = 100% = transparent), always applied
(no master switch — unity does nothing). It folds into PeerDspChain's L/R gain alongside pan
(gainL = panL*vol, gainR = panR*vol), so it's another per-sample multiply, zero added latency,
and multiplies with the global volume (per-peer fader -> mix -> master). Slider is 0-100%,
saved per profile, announces "Volume: N percent". Shaped recording captures it; raw (bypass)
recording doesn't. Held for next release.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Recording Settings gains two per-profile toggles (Ed's request):
* "Split recording into separate tracks" — each recording becomes a folder with one file per
connected peer (their received audio only) plus one for your own send.
* "Bypass pan and EQ when recording" — record the RAW audio (before pan/EQ) instead of the
shaped audio you hear; applies to single and split.
Engine: a per-peer record tap in SessionPlayout hands each peer's block to the recorder RAW
(before pan/EQ) or SHAPED (after) per the bypass flag; PlayoutEngine propagates the tap to all
sessions (+ inherits on reconnect) and fires OnRecordBlockComplete each render; AudioReceiver
exposes SetPeerRecordTap / OnRecordBlockComplete. AudioRecorder now accepts an explicit path and
exposes ExtensionFor. RecordingController composes one AudioRecorder per track: multi-track =
a recorder per connected peer + a "me" recorder; single-track shaped = the existing mixed tap;
single-track raw (bypass) = sum each peer's raw block per render, flushed on the block boundary.
Naming (Ed's scheme, sortable): <recordings>/<yyyy-MM-dd>/ then, single-track, "<HH-mm-ss>
RemSound recording.<ext>"; multi-track, a folder "<HH-mm-ss> RemSound recording multi track/"
containing "<machine name> <HH-mm-ss>.<ext>" per peer (name or IP) and for your own send.
Known edge (noted): a peer using sender-side BothIndependent (two lanes) records both lanes to
one file in a split recording; single-track bypass sums per render in the Mixed path. Off by
default (both toggles unticked = today's behaviour). Builds clean; pending Ed's hands-on test.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A sender reachable at more than one IP at once (e.g. LAN + Tailscale/VPN) picks its own
egress interface per packet, so its audio can arrive from a different IP than the single
address we discovered/dialled and allow-listed. The receiver then silently dropped every
Format/Audio packet (packetsRejectedNotAllowed climbing) while heartbeats — which skip the
allow-list — kept the peer showing connected: connected but silent. (Reported by
Jonathans859 building the RemSoundApple client; receiver-side, affects any multi-homed
sender incl. Windows<->Windows over a VPN.)
Discovery now remembers ALL source IPs per peer InstanceId (PeerDiscoveryService
.addressesById, expired on the same 8 s window; GetKnownAddresses). PushAllowedReceiveSenders
unions each selected peer's endpoint address with every address that peer has announced from,
so audio from any of the peer's interfaces is accepted. The SEND targets are unchanged
(still single-address) — only the accept-list widens, and only to other addresses the SAME
peer (by InstanceId) announced from, so it can't accept an unrelated machine.
Held for next release.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
New feature (Ed's jam-mixing request): pan and EQ each peer's signal independently.
Engine (zero added latency — per-sample, applied to each peer's isolated block just
before the mix): PeerDspChain (balance pan + RBJ biquad EQ) built on the UI thread and
swapped onto SessionPlayout via a volatile reference; PlayoutEngine remembers it per
address so a reconnecting peer keeps its shaping; AudioReceiver.SetPeerDsp facade.
Model: per-profile PeerShaping dict (keyed by peer address) + EnablePan/EnableEqForPeers
master switches; machine-wide AppConfig.ShowPanEqTab. Fixed band layouts in PeerEqBands
(3-band tone control: bass/mids/treble shelves+bell; 10-band ISO graphic EQ), +/-12 dB.
UI: a "Pan and EQ" tab (before Audio profile, shown only when ShowPanEqTab is on) with
the two enables, a connected-peer picker, a pan slider (balance, keeps stereo), a
"reset EQ" button (clears both modes' bands, leaves pan), a 3/10-band mode picker and its
band sliders — all TrackBars (arrow + page-up/down), updating in real time and saved per
profile. Sliders set a friendly AccessibleName on change (pan centre/left/right %, band
dB). "Show the Pan and EQ tab" checkbox added to Preferences > General.
Everything is off by default (tab hidden, both enables off), so this is dormant for all
users until switched on. Builds clean. Pending Ed's hands-on testing before release.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Feature request from the same singer: a way to pin a profile to exact peer addresses
so RemSound never matches the other computer by its advertised name and never switches
to a different address it discovers — for a machine reachable at two addresses at once
(VPN + LAN), they want only the one they chose, and would rather the connection die than
wander. The logical end of the v4.7/v4.8 direction.
New per-profile Profile.LockPeerAddresses (default false), round-tripped through
RemSoundSettingsStore (ApplyProfile/CopyTo + Load/SaveLockPeerAddresses), mirroring the
PriorityMode pattern. New AccessibleCheckBox on the Connectivity tab ("Lock to these exact
peer addresses, no matter what — never follow names or switch", Alt+L), saved with the
profile, marks the profile dirty on change. When set, RefreshKnownPeers early-returns
before the discovered-peer merge and the address-follow, so the profile's peers stay
exactly as set (the allow-list is still pushed). Off = unchanged behaviour.
Manual: rewrote the "Connecting to one specific IP" section (which over-promised that
add-by-IP "can never drift" — the merge/follow could) into an unambiguous "Locking a
profile to one exact address" section, plus a Connectivity-tab control-table row.
Held for the next release.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The same singer hit a rare crash: their transmitter (COMP3) was reachable at two
addresses at once — the VPN address 10.8.0.1 they chose and that machine's wireless
192.168.3.245 — and the discovery-driven endpoint-follow ping-ponged the connection
between the two (the log shows four moves in 58 ms) right where the process died with
no shutdown line, no managed exception, no dialog: a hard crash from the receiver
audio-session teardown/rebuild churn the thrash caused.
Fix: the follow loop now never moves off an endpoint that's still answering heartbeats,
only follows once the current one has been unreachable for a sustained grace period
(6 s), only to an address that is itself answering, and never more than once per cooldown
(15 s) — so it can't thrash, and a peer reached on a working address stays put (honours
the singer's "just stay on 10.8.0.1"). New endpointUnreachableSinceUtc + lastEndpointMoveUtc
state; genuine DHCP/network moves are still followed a few seconds later.
Also: a global crash handler (Program.WriteCrashReport on AppDomain.UnhandledException +
TaskScheduler.UnobservedTaskException) writes a crash-*.txt into the logs folder, so a
future "RemSound just vanished" report leaves a stack behind. Removed a stale doc comment
left over from the v4.7 adoption removal. Manual gains a "RemSound closed unexpectedly"
troubleshooting entry. Version 4.8; About + RELEASE_NOTES updated.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Removes the heartbeat "adopt a live address" feature (added v1.6). On a LAN with
more than one RemSound machine it could latch a receiver onto an unrelated sender
that happened to be pinging the audio port — then never recover to the real peer,
needing a manual restart (the singer's #15, with log). The feature guessed peer
identity from an untracked ping source with no way to verify it was the same peer;
on the stable VPN/LAN addresses RemSound is actually used with, it only ever caused
harm, since same-address reconnect already works via the continuous heartbeat.
Removed TryAdoptLiveHeartbeatAddress + IsPrivateLanAddress (MainForm) and
GetUntrackedPingSources + recentPingSources (HeartbeatService); the identity-safe
discovery-based following (by verified peer ID) stays. Manual troubleshooting entry
rewritten to match.
Also bundles the held changes since v4.6: status reads line-by-line with GB totals
and double-press-to-copy, CPU/memory in the status, the Install Scripts folder, and
the what's-new-after-failed-update fix. Version 4.7; About + RELEASE_NOTES updated.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Andre confirmed (via NVDA speech history) that holding the speak-status hotkey
doesn't repeat or spam — so the defensive toggle that let users disable the
double-press-to-copy was needless configurability. Removed the Preferences
checkbox and the DoublePressStatusToCopy setting; double-press-to-copy (Andre's
own idea) stays, now simply always on. There was never any debounce/anti-spam
code to remove — the only timing is the 600 ms double-tap detection window, which
is the feature itself. Manual updated to drop the toggle line.
Held for the next release (the toggle never shipped).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
New last status line "CPU usage 2% and memory 184 MB" — CPU as a share of the whole machine
(Task Manager style: process CPU-time delta / wall-clock / logical-core count), memory as the
working set via the same MB-to-GB formatter the totals use. Sampled on the existing once-a-second
status tick with a cached Process handle. Shows on screen and reads/copies with the rest of the
status (Ed's idea).
Held for the next release.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Preferences General-tab checkbox "Double-press the speak-status hotkey to copy the status to the
clipboard" (Alt+C), machine-wide (AppConfig.DoublePressStatusToCopy), on by default. When off, a
double press just reads the status again. SpeakStatusLine reads the flag only when the timing already
qualifies, so a normal single press never touches the config. Manual's speak-status section now
covers the line-by-line read, GB totals, and the double-press copy + its toggle.
Held for the next release.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Andre's feedback on the spoken status (the issue #13 feature):
- Speak the status one line at a time instead of collapsing the lines into a run-on sentence —
this also removes the doubled "." the collapse produced (each line already ended in a period).
- Totals switch to GB once they reach a gigabyte ("4.5 GB" vs "4558.2 MB"), via a FormatDataSize
helper used by the readout itself so the on-screen and spoken figures stay consistent.
- A quick DOUBLE press of the speak-status hotkey copies the status to the clipboard (with a
"copied" announcement) so it can be shared with others.
Held for the next release.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the running-version-vs-saved-version trigger for the "what's new" popup with a
one-shot marker the updater writes ONLY on a successful update (UpdateApplier success
path). A failed/rolled-back update never writes it (and clears any stale one), so it can
no longer re-trigger what's-new — the old best-effort flag save could lose a race during
the update churn and leave the version mismatched, which was the bug.
New WhatsNewMarker seam (Write/Exists/Consume) + a SelfTest case for the consume-once
contract. MaybeShowWhatsNewAfterUpdate now shows iff the marker is present, then deletes
it; still records LastWhatsNewVersion for the import-offer's upgrade detection.
Not released yet — bundling with the connection-retry (#15) work in the next release.
No version bump, no manual change (internal fix).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- New "Use Windows default audio device, follows Windows changes" entry at the top of the
received-output and send-input WASAPI lists. Resolves the current Windows default live,
re-routes automatically when the default device changes, works alongside specific devices,
and persists across launches (a follower can't go stale). Optional "untick the others?"
prompt with a remembered "don't ask again", reset via a new Options item "Reset the default
audio device prompt".
- Manual updated for the feature, plus a sweep that corrected the now-stale Options-menu
section (retired Startup-behaviour item, four->five Preferences tabs, missing entries).
About changelog and RELEASE_NOTES updated; version 4.6.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Pre-v4.4 upgraders are offered a one-time dialog to copy their keyboard shortcuts
from one of their profiles (still readable in the profile files) instead of being
reset. Users who already went through v4.4's reset are deliberately NOT re-offered
(gated on KeyboardShortcutsGlobalNoticeShown). New KeyboardShortcutImportDialog +
AppConfig.KeyboardShortcutsImportOffered + MainFormHotkeyController.ReloadAndReRegisterAll.
- Keyboard shortcuts dialog: new "Clear this shortcut" button; Delete inside the
capture box leaves a shortcut unassigned.
- Relabelled the three RemSound-app remote rows to "Send remote RemSound volume/..."
to distinguish them from the Windows-global ones.
- Manual (readme.html + MANUAL.md), About changelog, RELEASE_NOTES updated; version 4.5.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Fixes issue #14: shortcuts were stored on each Profile, so one set on profile A
didn't apply on profile B and seemed to vanish on switch. They now live in
AppConfig (one set shared by every profile). RemSoundSettingsStore's Load*/Save*
hotkey methods re-point to AppConfig (callers unchanged); the per-profile cache
fields, profile load/save plumbing, and the HotkeySetting helper class are removed.
Profile's HotkeyRecord fields stay only for back-compat deserialization.
On upgrade, shortcuts reset to defaults (there's no single correct set to carry over
since profiles could hold different/partial sets). A one-time startup notice tells
upgraders to re-set them; fresh installs are silently marked done (nothing to reset).
Manual, About changelog and RELEASE_NOTES updated; csproj <Version> 4.4.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- New screen-reader hotkey "Speak the RemSound status information" (issue #13):
reads the status line aloud through the active screen reader via Tolk, fires from
anywhere (system-wide), unset by default. Built behind an IScreenReaderOutput seam
so a future build can swap Tolk for Prism on Windows 10+ without touching callers.
Tolk DLLs vendored under tolk/ and shipped next to the exe.
- New Logging tab in Preferences: Enable logs + Write logs now moved there, plus
opt-in startup "warn if logs folder exceeds N MB" and "delete logs older than N days",
and a "Delete all logs" button (Yes/No confirm). New LogMaintenance helper + AppConfig
settings drive it.
- Manual (readme.html + regenerated MANUAL.md), About changelog and RELEASE_NOTES
updated in plain English; csproj <Version> bumped to 4.3.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Connect no longer freezes: PushDiscoveryUnicastHints resolved remembered
hostnames with synchronous Dns.GetHostAddresses on the UI thread, blocking the
whole window for the DNS timeout on an unresolvable name. A screen-reader user
experiences that as the entire machine locking up. Resolution now runs off the
UI thread. Same class of bug as the v3.0.1 UPnP-on-the-UI-thread hang. (#10)
- New profile / profile switch no longer hides the window: OnShown ORed the
global StartMinimised into every instance, so creating a new profile while
Start minimised was on dropped the window to the tray and looked like a crash.
StartMinimised now applies only to a genuine cold launch; relaunches honour the
explicit per-instance flag. (#12)
- Smoother WASAPI audio: the receive producer loop and sender mix loop pace
themselves with WaitHandle.WaitOne, bound by the system timer (~15.6ms default).
Without a fine timer the 10ms feed slips to ~16-31ms and delivers audio in
chunky bursts (the desktop-render chunkiness behind Andre's dropouts/lag). New
SystemTimerResolution holds a 1ms timer whenever a stream is live, independent
of the opt-in Priority mode.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Starting straight into the tray (StartMinimised / --minimized) no longer plays the "minimise"
cue; only a genuine user minimise does (the startup path passes playCue:false)
- Restoring the window from the tray now lands focus on a real named control on the active tab so
NVDA announces it, instead of resting on the role-less QuietTabControl and surfacing silently
- Shared the focus-a-leaf-for-announcement helper between the main window and Preferences
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Audio cues
- Cues for send/receive on-off, minimise/restore, checkbox tick/untick, and tab switch
- Soft keyboard clicks while typing, with a distinct passkey sound on password fields
- Per-cue "Choose sound" variant picker; "(none)" silences a cue; front-most missing-sound warning
- Send/receive cues take priority over the generic checkbox sound; programmatic ticks stay silent
Preferences
- Redesigned into four tabs (General, Audio cues, Startup behaviour, Update settings)
- Startup behaviour moved in from the Options menu
- NVDA now announces the dialog on open (focus a real named control, not the quiet tab control)
Auto-tune
- Cause-aware: tells device render-callback stalls (more buffer can't fix) apart from genuine
network/buffer starvation, so it no longer pins latency high on chunky onboard cards
- Lowering the target eases the buffer down (glide) instead of trimming it, so no clicks while tuning
Sounds layout
- Shipped defaults moved out of the per-user folder into an install-side "default sounds" folder,
so updates can refresh them; user customs are Browse-picked file paths and are left untouched
- Startup migration removes both legacy sound folders; verified from oldest (v1.0-v3.3) and v3.4 layouts
Quiet automated launches
- New --silent launch flag mutes all cue sounds and suppresses the startup dialogs (migration notice,
update check, Realtek/mic/missing-sound warnings) so test launches never disturb the user
- run-tests / build-release / SelfTest repointed to the new "default sounds" layout
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Send/receive checkboxes have dedicated cue sounds (send/receive turned on/off) AND would
otherwise also fire the generic checkbox tick/untick. AccessibleCheckBox gains a SuppressCheckSound
gate; the send/receive checkboxes set it so that when their dedicated cue is on, only that cue
plays. When the dedicated cue is "(none)", the gate returns false and the generic checkbox sound
plays as normal - so the checkbox sound never overrides the purpose-built send/receive sounds.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
When a cue is switched on but its sound file can't be found (the player resolved to null - e.g.
a custom WAV was deleted, or a chosen sound is gone), RemSound now turns that cue off and tells
the user, front-most even when minimised (RestoreFromTray first), once per cue per session:
"RemSound was unable to find the <cue> sound file used when <event> happens. RemSound has set
this particular audio cue to not play for now, until a new sound file is specified."
CheckForMissingEnabledCues runs on first show (Shown) and after every cue reload (so it catches
a just-deleted custom WAV when the user closes Preferences). Per-profile cues are turned off via
the settings store, machine-wide cues via AppConfig.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Preferences dialog is now a QuietTabControl with four tabs (same accessible tab approach as
the main window; Ctrl+Tab / arrows switch tabs):
- General: profiles-folder browse, accept-remote-volume, UPnP, enable logs / write logs now.
- Audio cues: the redesigned cue UI (plain cue list + "(none)" sound option) + keyboard clicks.
- Startup behaviour: Start minimised / Start with Windows / Start with a specific profile -
moved here from the standalone Options-menu dialog, wiring and persistence unchanged (AppConfig
+ the Windows auto-start registry entry).
- Update settings: startup-check, frequency, check-now, silent-install, show-what's-new.
Removed the Options-menu "Startup behaviour" item and deleted the now-unused
StartupBehaviourDialog.cs (and dropped it from the self-test's accessibility audit). The audit
still passes on the tabbed dialog with no mnemonic clashes (Alt-letters are isolated per tab).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Part 1 - "Uncheck all inputs and outputs" button now also resets the ASIO driver to "(none)":
renamed to say so, and UncheckAllDevices sets asioDriverBox to row 0 for a full clean
WASAPI-only, nothing-selected state.
Part 2 - checkbox tick/untick sounds: every checkbox toggle anywhere in RemSound now plays a
short cue (check.wav on tick, uncheck.wav on untick) - instant feedback on which way a box
went, especially in the inputs/outputs lists. New CheckSoundService + two machine-wide cues
(CheckboxOn/Off) with the usual numbered-variant + Preferences treatment. Hooked from
AccessibleCheckBox.OnCheckedChanged and the device lists' WireCheckedListAccessibility, both
gated on the control being Focused so a genuine user toggle clicks but bulk programmatic
(un)checking (profile load, "uncheck all") stays silent. Reloaded at startup and on cue change.
Tests + manual updated; .sfk byproducts cleared.
Remaining for the overhaul (next): tabbed Preferences (General / Audio cues / Startup behaviour /
Update settings), the cue-list redesign with a "none" option replacing per-cue checkboxes, moving
Startup behaviour out of the Options menu, and a front-most "missing sound file" error.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Six new machine-wide cues, each with the same numbered-variant + Preferences treatment as
the others (enable tickbox, Choose default sound picker, Play/Browse):
- Send turned on / off, Receive turned on / off: fire from OnStreamingCheckboxChanged, so
they sound whether the user clicked the in-window tickbox or pressed the mute shortcut
(the hotkey flips .Checked, which routes through the same handler). Suppressed during
profile load by the existing password-gate guard, so loading a profile doesn't blast them.
- Minimise (hide) / Restore (show): fire from the tray controller's Minimize()/Restore() on a
genuine visibility transition (guarded against no-op / startup-minimise).
Enable flags + custom-WAV overrides for these six live machine-wide in AppConfig
(EnableSendOnCue.., MachineCueCustomPaths) - they're app-level feedback, not per-profile
audio - so no Profile/settings-cache plumbing. TryLoadCueSound now also honours the
machine-wide custom path. PreferencesDialog gains a MachineRow helper + the six rows.
Sounds: shipped via the existing sounds\*.wav wildcard. Fixed an obvious typo in the
supplied files ("rcieve off 1.wav" -> "recieve off 1.wav") so receive-off has both variants.
Renamed the old single-name cue WAVs to Ed's numbered-variant set; added key/passkey and the
new cue sounds.
build-release.ps1: new step deletes the SoundForge .sfk peak-file byproducts from sounds\
before packaging (they never shipped - build is *.wav only - this just keeps the tree tidy).
Tests + manual updated for the six new cues.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Cue sounds now ship as numbered variants ("connect 1.wav", "connect 2.wav", ...); the
count is never hard-coded so more can be added with no code change.
- CueSounds.cs: discovers a cue's "<base> <n>.wav" variants (case-insensitive) and
resolves the active default: per-profile custom WAV > machine-wide chosen variant >
first variant > silent. Wired into MainForm.TryLoadCueSound, the startup cue in
Program.cs, and PreferencesDialog.ResolveCueFilePath.
- AppConfig: DefaultCueSounds (machine-wide cueId -> chosen filename) and
EnableKeyboardClicks (on by default).
- Preferences: a "Choose default sound" listbox under the cue checklist - it lists the
selected cue's variants, arrowing it previews each sound and makes it that cue's
default. Plus a "Play keyboard clicks when typing into any edit field" checkbox.
- KeyClickService.cs: an app-wide WM_CHAR message filter + a low-latency NAudio mixer.
Typing into any edit field plays a random key click (key 1..N.wav); password fields
also play passkey.wav at the same instant. On/off live from the Preferences toggle.
Inert if the sounds are missing or the device won't open; never consumes the keystroke.
- csproj: ship every sounds\*.wav via a wildcard (variants, key clicks, passkey, future
additions) instead of stale per-file canonical names.
- Tests: resource checks (self-test + run-tests.ps1) now verify each cue has >=1 variant
and that key 1.wav / passkey.wav are present. Accessibility audit still green with the
new Preferences controls (Alt+D, Alt+K - no mnemonic clashes).
- Manual: variant picker, keyboard clicks, and the new sound-file naming documented.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Receiver: a Mixed (plain) session is rendered on an active lane in BothIndependent mode instead of being skipped, so a WASAPI-only sender is no longer silent to a receiver that has an ASIO driver selected. Also port the per-session buffer depth-drain (stops the receive jitter buffer bloating).
Sender: add sndAudFr meter (audio frames actually sent) to localise capture vs send.
App: startup sound cue (machine-wide, Preferences); stop sending audio when no peer is reachable (issue #8). Version 3.9.1.
Server (relay): fix updater version-compare for multi-dot tags, guard the main loop against crashes, reject spoofed BYE from a mismatched endpoint.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
New profile: a File-menu item + Ctrl+N that loads a fresh blank template as a
new unsaved session via a LoadBlankTemplateNext handoff to Program.cs's relaunch
loop — reachable even when "start with a specific profile" boots past the picker
(issue #6). Offers to save the current profile first if dirty; deliberately
silent (no profile-switch cue).
Renamed the user-facing "blank template" to "New profile": the picker's synthetic
entry (now a distinct marker TYPE, collision-safe against a real profile named
"New profile"), the window title ("RemSound — New profile"), and the manual.
Fixed the password-mismatch warning flashing away: it's raised from the 1 Hz
statusTimer, which kept firing into the modal loop and rebuilt the peer lists
(SyncAllPeerLists) under the dialog, knocking it out of the foreground. Now the
tick is frozen while it's up, it's routed through ForegroundDialog, and a
re-entry guard ensures one warning that stays put. Audited: it was the only
popup raised from a recurring timer.
Docs: manual section "Connecting to one specific IP address (and only that one)"
explaining by-name vs by-fixed-IP and that a profile saves the exact address
(issue #7 — functionality already existed); About box + RELEASE_NOTES for v3.8;
MANUAL.md regenerated.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Coalesce capture-engine rebuilds (CompositeCaptureBackend): a swap-triggering
source change now arms a 250ms debounce timer and re-arms on each further
change, so a flap or quick reconfiguration produces ONE rebuild to the final
state instead of a burst (Andre's 16:40 four-rebuilds-in-33s crackle). In-place
updates still apply immediately; a pending rebuild whose target flaps back is
cancelled.
Auto-tune (TickRoute) now keys off the SECOND-highest arrival-gap/render-gap
second in the lookback window instead of the single worst, so a lone ~1s
OS/driver stall no longer balloons the buffer to the 200ms cap (the 16:51
trim burst); sustained jitter still reacts at full speed. Logs both gap-max
(true peak) and gap-used (value acted on).
Mic-privacy detector widened: also catches a per-app Deny aimed at this exe
under ConsentStore\microphone\NonPackaged\<exe>, the HKLM NonPackaged gate,
and the Group-Policy/MDM force-deny (AppPrivacy LetAppsAccessMicrophone=2) —
the block shapes that silence WASAPI capture while ASIO sails past, and that
the old three-value check missed.
Forensic instrumentation so the next log proves what happened: capPeak=
(loudest pre-encode sample, per lane, on the diag line), mic-privacy verdict
logged at startup, ui: capture tick/untick events, and device-event: lines for
Windows endpoint changes.
Docs: mic-privacy + auto-tune sections updated in readme.html, MANUAL.md
regenerated, About-box changelog and RELEASE_NOTES for v3.7.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- Recover an unplugged/replugged output sound card automatically (issue #5):
detect the dead WASAPI device and remember the receive-output selection so it
re-ticks and re-opens when the card returns.
- Adaptive per-card WASAPI buffer target sized to each card's pull chunk, held
stable so it never flits about under CPU/network load.
- Consolidate all per-user data (config, profiles, logs, sounds) into one
"user settings and logs" folder; migrate every older layout; exclude it from
the updater so custom cue sounds now survive updates.
- Mic-privacy detector: warn once when a Windows-blocked mic is switched on, or a
profile loads with one already on.
- All warning/notice dialogs now come to the foreground even when minimised.
- Apply volume + mute on profile load (were saved but not restored).
- Crash-safe (atomic) profile/config saves.
- Fix two resource leaks (push-mode capture MMDevice; UPnP DeviceFound handler).
- Remove dead code (baseline-diff machinery, dead ASIO probes, no-op stubs).
- Docs: readme.html, MANUAL.md, About-box changelog and release notes for v3.5.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Builds on the v3.4 freeze (dd70613) with the fixes and tuning from live testing,
plus the v3.4 documentation pass.
Audio (receiver):
- Per-device WASAPI drift correction in MultiOutputPlayout. A pull-side resampler
(mirroring SessionPlayout's proven corrector) holds each output device's buffer at
a fixed low depth, cancelling the slow clock drift that made WASAPI peers "lag
apart" over long sessions. Feed-forward clock-ratio measurement plus a gentle
depth-restoring term; the first measurement window is discarded because WASAPI
start-up priming poisons it. ASIO already self-corrected; this brings WASAPI level.
- Output device buffer requested at 5 ms (WASAPI clamps it up to the device's minimum
period, ~10 ms) instead of 15 ms, since the corrector keeps it fed — a free saving.
UI / accessibility (MainForm, Program):
- Startup notices (what's-new About box, Realtek warning) now run one at a time via a
single sequence instead of separate BeginInvokes, so they no longer stack into
nested modals that couldn't be closed. The loading splash is skipped for a
tray-bound quick switch.
- Quick profile switch keeps RemSound in the tray if it was there, and plays the
switch cue immediately on click.
- Profile-switch cue now plays on click for every switch path (recent menu, quick
switch, File > Open) and no longer on a fresh start into the first profile. It was
also previously dead on the rebuilt form (pendingProfile was nulled first).
- Realtek ASIO toggle's accessible name now reads "Enable"/"Disable" to match the
visible text, instead of "Toggle" (screen reader read the wrong word).
Docs (plain English):
- RELEASE_NOTES.md: v3.4 entry.
- About dialog: v3.4 "what's new".
- readme.html (the canonical bundled manual): quick switch, the hotkey read-outs, the
new profile-menu-open cue, Realtek auto-detect/disable, and the config-folder path.
- MANUAL.md regenerated from readme.html via sync-manual.py so the two stay in sync.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Freezes the v3.4 feature set (everything since the v3.3 public release):
- Fix the receiver handle leak: the 3-second device-refresh timer reopened the
configured ASIO driver every tick, and Realtek's ASIO driver leaks Event+Mutant
handles on every open. Cache the ASIO probe per driver so it is opened once.
- Realtek ASIO block: detect a Realtek ASIO driver, offer once to disable it, and
never touch it again if disabled; Options-menu toggle to reverse. Global config.
- Device hot-plug is event-driven (AudioDeviceChangeNotifier) instead of a 3s poll;
debounced refresh, falls back to polling if registration fails.
- Quick profile switch: new global hotkey opens an NVDA-friendly popup of all
profiles (current marked); Enter/click switches; plays a new "profile menu open"
cue with Preferences mute + custom-sound.
- Announce assigned global hotkeys on the controls/menu items they drive (NVDA reads
"press X anywhere"). File > Open already had Ctrl+O.
- Held-back changes folded in: config-folder migration, codec-column fix, Tailscale
endpoint network-prune, empty-password guard, and the handle-leak diagnostics
(ProcessSelfMeter, HandleTypeProbe).
Version bumped to 3.4.0.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Headline: all audio is now encrypted (AES-256-GCM), keyed by a per-profile
password. Mandatory — v3.3 only interoperates with v3.3+.
Encryption
- RemSoundCrypto (Core): PBKDF2 key derivation, AES-GCM encrypt/decrypt
(low-alloc, into-span), password fingerprint, light on-disk obfuscation.
- Wire: SenderLane encrypts the audio payload (PCM split across parts when the
+28 overhead crosses MTU); AudioReceiver/StreamSession decrypt via a shared
single-thread AudioDecryptor. Fingerprint piggybacks on the Format packet
(offset 36, backward-compatible) so a peer can detect a password mismatch.
- Profile.Password (scrambled), carried through BuildCurrentProfile; MainForm
derives + pushes the key/fingerprint to sender + receiver (RecomputeAudioCrypto).
- UX: ask-for-password on profile create; File -> Change this profile's password
(ProfilePasswordDialog); Options -> Profile passwords (manager); a gate that
prompts before streaming without a password; and a clear "passwords don't
match" / "peer needs to update" message driven by the fingerprint.
Cue fixes
- CuePlayer (NAudio) replaces System.Media.SoundPlayer, which silently failed
on the 96 kHz/24-bit cue WAVs (and any custom file) — cues now play reliably,
resampled to 48 kHz/16-bit. Also fixes the Preferences preview button.
- Connect/disconnect cues now audio-gated with hysteresis: connected when audio
flows OR heartbeat healthy; lost only when audio stops AND heartbeat
unreachable. Kills false disconnects and the receive-only "no cues" case.
- Honest cue logging (played / muted / not loaded).
Smaller
- Endpoint stickiness: keep the audio target pinned to the heartbeat-proven
address instead of chasing a multi-homed peer's other (unreachable) address.
- "Online/offline" label now audio+heartbeat aware, not discovery-only.
- "Show what's new after each update" preference (on by default).
Docs: About v3.3 block, RELEASE_NOTES, README (encryption as a headline),
manual section 12 "Passwords and encryption" (+ renumber), MANUAL.md regenerated.
Version 3.2.0 -> 3.3.0.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- New "Update sound" cue (CueId.Update / update.wav). Plays just before an
update starts installing, on every path (manual, background-silent,
startup-silent), so a silent background update gives an audible heads-up
before RemSound closes to restart. Per-profile mute + custom-sound override
in Preferences, same infrastructure as the other cues:
* Profile.EnableUpdateCue + RemSoundSettingsStore Load/Save + round-trip
* MainForm updateSound field, TryLoadCueSound, play in InstallUpdateAsync
gated by LoadEnableUpdateCue
* PreferencesDialog "Update sound" CueRow + ResolveCueFilePath mapping
* update.wav shipped in sounds\ via csproj Content
- Single-instance "switch to the running copy" now actually brings the window
to the front. The second copy grants the running copy foreground rights via
AllowSetForegroundWindow before signalling, and lingers briefly so it can
raise itself before we exit — without this, Windows' foreground lock left
the running window only flashing in the taskbar (Ed's report).
- Docs: About box v3.2 block, RELEASE_NOTES.md, manual cue section (now seven
cues, with the update cue described), MANUAL.md regenerated.
- Version bumped 3.1.3 -> 3.2.0.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Fixes the chained-fault runaway Andre hit after an update (multiple copies
stacking, audio climbing to deafening, terminal kill to recover).
- Single-instance lock (SingleInstanceCoordinator + SingleInstanceDialog,
wired in Program.Main). A named mutex makes two copies impossible. A second
launch offers: switch to the running copy (default; surfaces it from the
tray via a named activation event), or force the running copy closed and
start fresh (Process.Kill, retried elevated if the target is elevated).
This is the structural fix that makes the stacking runaway impossible.
- Prompt-free update exit. InstallUpdateAsync sets updatingInProgress before
Application.Exit(); the close path's skipPrompt now honours it, so no
unsaved-changes dialog (whose default button is Cancel) can abort the
update's restart.
- Read-only persistence fix. BuildCurrentProfile now carries
currentProfileReadOnly into the saved snapshot. Previously a deliberate
save of a locked profile wrote ReadOnly=false, silently unlocking it on
disk — which re-armed the save prompt that then blocked the update.
- In-process double-install guard. updateInstallStarted stops the ~4 s
startup check and the background poll both staging an install + helper.
- Docs: About box, RELEASE_NOTES.md, readme.html + MANUAL.md ("Only one copy
of RemSound runs at a time").
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
EdnunpandClaude Opus 4.8