5e974f7064e5a379282ecce972cd60f850d23f9a
57
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Ednunp
|
79b28b6c02 |
Bump to v2.1.0: UPnP, read-only profile lock, sleep/hibernate audio fix
Headline features: * Automatic router port opening (UPnP / NAT-PMP / PCP). Opt-in via Preferences; surfaces external address + carrier-grade NAT detection. * Lock profile (read-only). New File-menu tick that makes a profile load-only — session changes don't persist, no save prompt on close. Unblocks unattended shutdowns (NVDA gone, remote dropped, hibernate) where the existing save prompt could deadlock. * Check for updates on startup (default on) + brief countdown notice before silent updates install, so a launch-time update doesn't make the app silently vanish. * "Cue sounds" -> "Audio cue sounds" label clarification. Bug fixes: * No sound after the computer wakes from sleep. PowerResumeHandler rebuilds the audio backend automatically on resume; brief "Reconnecting to audio driver" splash during the rebuild. * Receiver audio silent after waking from hibernate. RefreshAudioDeviceLists now treats a transient ASIO probe failure (returns -1/-1 because the driver is mid-teardown / mid-reinit) as "retry next tick" instead of clearing the user's tick selection. Diagnostic-only changes (gated on the existing Enable-logs checkbox, zero cost when off): * AudioStepProbe split into cross-buffer vs within-buffer maxes so log inspection can tell a real-content sharp transient apart from a pipeline-boundary glitch. Plumbed through every probe owner. * New rxNetGapMs + gc0/gc1/gc2 delta columns in the diag log to split receive-side jitter into network-layer vs managed-runtime causes. Files touched: RELEASE_NOTES.md + readme.html + 24 source files across RemSound.Core / RemSound.Sender / RemSound.Receiver / RemSound.App. Three new app files: PowerResumeHandler, RouterPortMapper, UpdateInstallNoticeDialog. Wire format and audio pipeline unchanged from v1.5 onward — v1.5 through v2.1 peers interoperate. |
||
 EdnunpandClaude Opus 4.7
|
918ca6cac0 |
Bump to v1.6.0: peer-address recovery, reconnect crash, long-run memory/CPU leak
Three reliability fixes. Wire format and audio pipeline unchanged from v1.4 / v1.5 — all interoperate. Peer address recovery: * When a tracked peer goes Unreachable (its resolved address — often a stale DNS / Pi-hole record, or a peer that rebooted onto a new IP) but the same peer is still heartbeat-pinging us from a different address, RemSound now adopts the live address instead of transmitting to a dead one. HeartbeatService records untracked ping sources; MainForm's TryAdoptLiveHeartbeatAddress (1 Hz) re-points the sender, heartbeat tracking and receiver allow-list. Conservative: fires only on the unambiguous one-unreachable-and-one-source case, private-range (RFC1918) addresses only so a relay can't hijack the sender, 10 s cooldown. Reconnect crash: * Fixed IndexOutOfRangeException in MainForm.SyncConnectedList. A churny peer-list rebuild (peer reboot) left SelectedIndex pointing past the rebuilt item array; the 1 Hz status timer read SelectedItem and crashed the app. New SafeSelectedItem bounds-checks the index; applied to all three timer-driven sync methods. The status tick is also wrapped in try/catch so a transient WinForms hiccup logs instead of crashing. Long-run memory / CPU leak: * A receiver left running for hours grew to gigabytes and climbing CPU. Decoder sessions orphaned by peer reconnects were not reaped — every reconnect mints a fresh (endpoint, streamId) key, and PruneIdleSessions silently skipped sessions whose PlayoutEngine lookup missed. Rewrote it to reap on each session's own LastWriteUtc (no cross-dictionary lookup), added a hard MaxLiveSessions cap as a backstop, and a "stream sessions live: N" diagnostic line. Bounds both memory and render-thread CPU. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> |
||
|
EdnunpandClaude Opus 4.7
|
4915a9afe1 |
Bump to v1.5.0: cross-lane routing fix, recording double-tap fix, menu reorg
Bug fixes: * BothIndependent recording was double-tapped — when both WASAPI and ASIO outputs were ticked, recordings came out garbled and ~2x the expected duration. AudioRecorder now uses four per-lane rings (sent-wasapi, sent-asio, recv-wasapi, recv-asio) plus a writer- thread mix step that drains min(wasapi, asio) frames and sum-mixes with the soft-tanh limiter. Tap signatures gained a RenderRoute parameter; Mixed maps to the wasapi slot. * A peer announcing on the WASAPI lane was inaudible when the receiver only had an ASIO output ticked (and vice versa). The session opened, samples flowed into the SessionPlayout ring, but ReadForRoute(AsioLane) skipped any session whose Route was WasapiLane so nothing drained the ring. PlayoutEngine now tracks per-lane "is this lane backed by a device" via volatile bools settable through SetLaneActive(RenderRoute, bool), called from CompositeRenderBackend.SetOutputDevices whenever the device split changes. ReadForRoute admits orphan sessions when the other lane is inactive. Menu reorganisation: * New Options menu (Alt+O) holds Recording settings (Alt+S), Keyboard shortcuts (Alt+K, Ctrl+K), Startup behaviour (Alt+T), Preferences (Alt+P, Ctrl+P). Pre-v1.5 these were scattered across File menu, Record menu, and inside the Preferences dialog itself. * Record menu mnemonic moved from Alt+O to Alt+K, rendered as "Record (Alt+K)" so the chord is visible despite K not being a letter in "Record". Alt+R is taken by Receive audio. * File menu — new Recent profiles submenu (Alt+F, R) listing the five most-recently-opened profiles. Press 1..5 inside the submenu to jump to a slot. Missing files are skipped from the menu but kept in storage. * Rename current profile moves to Alt+M (was R), Minimise to tray moves to Alt+N (was M). * Lock to audio clock was Alt+K, now Alt+D. UX additions: * Ctrl+O = Open profile (matches the menu chord). * New global hotkey: Start / Stop recording. Pickable from Options -> Keyboard shortcuts. Unbound by default. Works system-wide. Wire format and audio pipeline unchanged from v1.4 — v1.4 and v1.5 peers interoperate. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> |
||
|
EdnunpandClaude Opus 4.7
|
45b709d49d |
Recording-settings dialog rework + menu mnemonic clean-up
Recording settings dialog
=========================
Promote what were row attributes inside the format-attributes table
into their own dedicated listboxes. Pre-rework each format's
attribute list contained a row per (quality knob × channel mode)
combination — doubling the row count for no real benefit. WAV had
6 rows, MP3 / OGG-Opus had 8, FLAC had 4. Channel mode is now its
own listbox; per-format attribute lists shrink to 3 (WAV), 4
(MP3 / OGG-Opus), 2 (FLAC).
FLAC compression level was previously a hidden RecordingSettings
field locked at the libFLAC default of 5. Now exposed as its own
conditional listbox with all 9 levels (0..8). Visible only when the
selected file format is FLAC; the column collapses to 0% width
otherwise so the dialog reads cleanly as 4 columns for non-FLAC
formats and 5 for FLAC.
Mnemonics:
* Source Alt+S (unchanged)
* File format Alt+F (unchanged)
* Attributes Alt+A (unchanged)
* Compression Alt+L (new, FLAC-only visible)
* Channels Alt+C (new)
* OK Alt+O (unchanged)
* Cancel Alt+N (was Alt+C — moved to free C for Channels)
Record menu mnemonics
=====================
Item mnemonics inside the Record menu reorganised so the keystroke
inside the menu matches the same letter used for Ctrl+R outside it,
and Settings reads naturally:
* Start recording / Stop recording Alt+R (was Alt+S)
* Recording settings Alt+S (was Alt+T)
* Open recordings folder Alt+O (unchanged)
* Change recordings folder Alt+C (unchanged)
UpdateStartStopRecordingMenuLabel keeps the underline on a literal
R in both states ("Sta&rt recording" → "Stop &recording") so the
keystroke does the same job regardless of which label is active.
No version bump — the running version stays at 1.3.0. These changes
will be bundled with the next public release alongside whatever else
is in flight.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
|
||
|
EdnunpandClaude Opus 4.7
|
c59e413c1f |
Bump to v1.2.0: recording, sound cues, drift compensation, diagnostics
New user-facing features:
* Recording. Dedicated Record menu (Alt+O — moved from Alt+R to
avoid clashing with the Receive audio checkbox), Start/Stop on
Ctrl+R, settings dialog, per-profile source / format / bit-depth /
channel-mode / folder. Three source modes (received only, sent
only, both). Files are crash-resilient — a process crash
mid-recording leaves a playable file containing everything up to
the last header refresh (~5 seconds).
* Four output formats, all functional:
- WAV: 16/24-bit PCM or 32-bit float, custom writer with
periodic RIFF re-patching.
- MP3: LAME 128–320 kbps CBR (via NAudio.Lame).
- OGG-Opus: 96–256 kbps VBR (via Concentus.Oggfile, reusing the
Concentus encoder from the wire path).
- FLAC: 16/24-bit lossless (via CUETools.Codecs.FLAKE — pure
managed, no native DLL).
* Recording start/stop sound cues. record start.wav and
record stop.wav play around the recording transition. Played via
System.Media.SoundPlayer to the default Windows output, separate
from the recording pipeline so a normal recording does not contain
the cue.
* Per-cue Preferences. The old single "Mute connect/disconnect
sounds" checkbox is replaced by a CheckedListBox: Connect /
Disconnect / Recording start / Recording stop. Old profiles with
the legacy MuteConnectionCues=true are honoured on first load via
a migration path in the new Load* helpers.
* Receiver-side drift compensation switched from discrete
single-frame splices to a continuous WdlResampler at a smoothed
rate ratio. SessionPlayout.cs rewrite.
Diagnostics (only active with Enable logs ticked):
* Per-stage discontinuity probes — sender raw capture (per backend,
PushModeWasapi + Asio both wired), sender pre-encode (now per
lane in BothIndependent, fixing a cross-stream artefact), receiver
post-decode, post-ring, post-resampler.
* Wire-level packet sequence tracking on each PCM stream — in-order
/ missed / reordered / duplicated counts in the diag log.
* Clipped-sample delta in the diag log.
* New AudioStepProbe in RemSound.Core with per-channel scan helper.
UI changes:
* Record menu uses Alt+O (Rec&ord). Inside the menu, item mnemonics
unchanged (S / T / O / C).
* Auto-tune interval combo label is mode-aware: "Auto-tune latency
interval" in classic modes, "Auto-tune interval — WASAPI and ASIO"
in BothIndependent. The combo's Enabled state now follows EITHER
lane's auto-tune checkbox (was only the WASAPI one — bug).
Wire format and audio pipeline unchanged from v1.1 — v1.1 and v1.2
peers interoperate.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
|
||
|
EdnunpandClaude Opus 4.7
|
768875cebb |
Add priority mode + always-on network packet priority
Priority mode (per-profile toggle, Audio profile tab, Alt+U): - Bundled PROCESS_POWER_THROTTLING_STATE with EXECUTION_SPEED and IGNORE_TIMER_RESOLUTION flags (keeps CPU at full clock + 1 ms quantum pinned regardless of OS idle decisions) - PowerSetRequest(EXECUTION_REQUIRED) + SetThreadExecutionState so the system can't decide we're idle and downclock - timeBeginPeriod(1) for 1 ms scheduler quantum - ProcessPriorityClass.High, ProcessMemoryPriority normal, working-set minimum locked via SetProcessWorkingSetSizeEx(HARDWS_MIN_ENABLE) - Fully reversed on toggle-off and on form close - Off by default (battery cost on laptops); explicit opt-in per profile MMCSS thread priority on hot threads bumped from High to Critical (network listener, mix loop, render thread) — always on. Network packet priority (always on, no toggle): - qWAVE flow on the outbound UDP socket at QOS_TRAFFIC_TYPE_VOICE with QOS_NON_ADAPTIVE_FLOW (Voice priority, DSCP 46/EF, WMM Voice on Wi-Fi) - Silent fallback if qwave.dll missing or QoS service disabled - Sender + receiver kernel UDP buffers bumped to 1 MB each (was 256 KB send / 512 KB receive) for resilience against ~30 ms stalls Bug fix: PreferencesDialog logging toggle no longer flags the profile as dirty. Logging is a machine-local AppConfig setting; the spurious ChangedAnyProfileSetting flag was triggering the unsaved-changes prompt on exit after toggling logs alone. Manual updated: new "Use CPU and Windows performance settings in high priority mode (Alt+U)" subsection on the Audio profile tab, new "Network packet priority (qWAVE / Voice / WMM)" subsection in the network chapter, Alt+U row added to keyboard-shortcuts table. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> |
||
|
Ednunp
|
17259438c6 | Initial commit: RemSound v1.0 |