Local checkpoint - NOT for public release. Ed: the service profile must never be
reachable except through the Service menu.
Also fixes a real bug: the service runs as SYSTEM, whose per-user data folder is NOT the
interactive user's - so a profile saved in the user's profiles folder (or AppConfig, both
per-user) was invisible to the service. It would have idled, never streaming.
- New RemSound.Core.ServiceStore: the service profile + its settings (logging) live in a
MACHINE-WIDE ProgramData\RemSound\service location - same absolute path for the user
(config dialog) and SYSTEM (service). Moved ServiceProfileName/ServiceLoggingEnabled off
AppConfig (per-user) onto this store.
- ServiceSendHost.FromConfig + RemSoundService now read ServiceStore; ConfigureServiceProfile
saves there (and migrates + deletes any profile left in the old user-folder location).
- Because it's no longer in the user's profiles folder, it can't appear in the startup
picker, File->Open, Recent profiles, or the password manager (all of which read the user
ProfileStore); the reserved-title filter in ListProfileTitles stays as belt-and-braces.
- Password button renamed "Set service profile password".
- New self-test "Service profile isolation": store is under ProgramData, the reserved title
is filtered from the listing, and it round-trips through the machine-wide store.
Gate 27/27.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Local checkpoint - NOT for public release. Audited ServiceSendHost against MainForm's
send path (Ed: make the service reuse the same code, be just as stable). Three real
divergences found and fixed:
1. ENCRYPTION FINGERPRINT (critical): the host set sender.AudioKey but NOT
sender.AudioFingerprint. The main app (RecomputeAudioCrypto) sets both, and the peer
verifies the fingerprint before accepting a stream - so the service's encrypted audio
would have been REJECTED at the far end. Now derives and sets both from the password.
2. OPUS FRAME: the main app applies EffectiveOpusFrameSamples (the "Small" send rate
halves the Opus frame); the host passed the raw frame, so it would encode differently
than the main app for the same profile. Now reuses MainForm.EffectiveOpusFrameSamples
(made internal - same code, not a copy).
3. PEER PORT: send target fell back to the profile's LOCAL AudioPort; the correct default
is RemPacket.DefaultPeerDialPort (what the main app's manual-peer path uses). Same value
today but the right constant.
Reviewed and OK: sender defaults to WasapiOnly (no SetAudioMode needed); BuildSendSpecs
matches ApplySendSources for explicit-device profiles; default-device changes are covered
by the device-change watcher; direct-send (no relay/StartReceiving) is the intended v1 scope.
New self-test "Service sender parity" asserts key + fingerprint + effective Opus frame
match the main app. Gate 26/26.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Local checkpoint - NOT for public release. Ed: don't add continuous background checks
(they've piled up before) - reuse the disconnect/reconnect mechanism the main app uses.
Replaced the 5s packet-flow health poll with AudioDeviceChangeNotifier - the SAME
event-driven watcher the main window uses. It fires only when a device is added/removed/
changes state or the default changes (nothing polls, nothing accumulates - it's a single
registered COM callback, disposed with the host). While the service intends to send, that
event re-opens capture, covering: the audio stack finishing coming up at boot, a device
plugged/unplugged, and the audio service restarting. Debounced (a hot-plug fires a burst).
Also dropped the per-tick Resume retry: now one start attempt per app-absence, then the
device watcher drives any re-open. The only remaining periodic thing is the tiny 1s
presence-token check for the app-yield (a mutex probe - allocates nothing, accumulates
nothing). Gate 25/25.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Local checkpoint - NOT for public release. Answers "what if it looks for sound
devices before their services are up?"
Two layers now:
- depend= Audiosrv/AudioEndpointBuilder (prior commit) makes Windows start the service
only once the audio services are running.
- Self-heal in the run loop: while it should be sending, if no packets have flowed for
~5s then no capture is actually running (endpoints not fully ready at boot, a device
dropped, or the audio service restarted) - it re-opens the capture. And while NOT
sending it already re-tries every second, so a slow-to-appear audio stack or a device
that returns later is picked up automatically.
So even if the service races ahead of the endpoints being fully enumerated, it keeps
retrying/re-opening until audio actually flows, rather than sitting silent. Gate 25/25.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Local checkpoint - NOT for public release. First increment of the send-only
Windows service feature (design in memory/project_remsound_service).
THE SPIKE PASSED: the send engine runs fully headless (no window, no message
pump) and streams, proven by a real self-test — the one genuine unknown that
gated the whole feature. Also proves the app-yield model end to end.
What's in this increment (all headless, all tested, 19/19 gate):
- AppConfig: ServiceProfileName + ServiceLoggingEnabled (machine-wide).
- InteractivePresence (Core): the cross-session app-yield token. App holds a
Global\ mutex for its lifetime; the service checks it and yields while an
interactive app is present, resuming when it closes OR crashes (OS frees the
mutex). Name-parameterised internal seams for isolated testing.
- ServiceSendHost (App): loads a send-only profile and streams it to its peers,
WASAPI-only, no ASIO/receive. ApplyProfile/Suspend/Resume + a RunLoop that
drives them from the presence token with a settle delay. v1 sends to direct
peer addresses (LAN/port-forwarded); NAT/relay discovery stays the app's job.
- Program.cs: the interactive app now acquires the presence token at startup so
a future service yields to it.
- Tests: "Service app-yield token" (held=present, released=absent) and "Service
send host (headless stream + yield)" — streams a captured device to a local
receiver over loopback, verifies start/suspend/resume, then drives the full
RunLoop against the token (held=suspended, released=resumes-and-flows).
Still to come (later increments): the --run-service entry + Windows-service
registration, the Service menu, the 3-tab config dialog, updater integration,
docs. None user-facing yet, so nothing deployed.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
EdnunpandClaude Opus 4.8